EUVIMEDEUVIMED entdecken
Crossref

Three-dimensional-printed porous titanium scaffolds outperform biphasic calcium phosphate ceramics for load-bearing critical-sized bone defect repair

Zijian Li, Chenliang Quan, Guanglin Wang, Xiao Liu, Hufei Wang, Jianpeng Gao, Zhengyang Chang, Jiazhi Yan, Hua Chen, Ming Li, Jianheng Liu

International Journal of Bioprinting · 08.06.2026 · 12 (3) · 026180160

DOI: 10.36922/ijb026180160 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 08.06.2026. Verfasst von Zijian Li und 10 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Repairing critical-sized, load-bearing bone defects remains a formidable clinical challenge, primarily due to the mechanical fragility of traditional bioceramics. This study systematically compared the bone regenerative efficacy of surface-microstructured three-dimensional (3D)-printed porous titanium (3D-SMPT) and reinforced biphasic calcium phosphate (RBCP) ceramics. In vitro evaluations demonstrated that a biomimetic coating effectively overcame titanium’s bioinertness, thereby endowing 3D-SMPT with excellent biocompatibility and osteoinductivity comparable to those of RBCP. In vivo cross-species assessments revealed significant biomechanical differences: in a low-load rabbit ulnar model, both scaffolds exhibited equivalent osteogenesis. However, in a true weight-bearing beagle femoral model, RBCP suffered severe structural collapse due to inherent brittleness. In stark contrast, leveraging its cortical bone-matched compressive strength (83.14 MPa, approximately 10-fold higher than that of RBCP at 7.68 MPa) and interconnected porosity, 3D-SMPT maintained long-term mechanical stability, effectively mitigating stress shielding to facilitate massive mature bone ingrowth and robust osseointegration. In conclusion, 3D-SMPT achieves a perfect integration of bioactivity and load-bearing stability, overcoming the inherent fragility of traditional ceramics and offering a highly promising clinical alternative for the repair of massive load-bearing bone defects.

Zitieren

APA

Li, Z., Quan, C., Wang, G., Liu, X., Wang, H., Gao, J., Chang, Z., Yan, J., Chen, H., Li, M., & Liu, J. (2026). Three-dimensional-printed porous titanium scaffolds outperform biphasic calcium phosphate ceramics for load-bearing critical-sized bone defect repair. International Journal of Bioprinting, 12(3), 026180160. https://doi.org/10.36922/ijb026180160

Vancouver

Li Z, Quan C, Wang G, Liu X, Wang H, Gao J, et al. Three-dimensional-printed porous titanium scaffolds outperform biphasic calcium phosphate ceramics for load-bearing critical-sized bone defect repair. International Journal of Bioprinting. 2026;12(3):026180160. doi:10.36922/ijb026180160

BibTeX
@article{Li2026,
  author = {Li, Zijian and Quan, Chenliang and Wang, Guanglin and Liu, Xiao and Wang, Hufei and Gao, Jianpeng and Chang, Zhengyang and Yan, Jiazhi and Chen, Hua and Li, Ming and Liu, Jianheng},
  title = {Three-dimensional-printed porous titanium scaffolds outperform biphasic calcium phosphate ceramics for load-bearing critical-sized bone defect repair},
  journal = {International Journal of Bioprinting},
  year = {2026},
  volume = {12},
  number = {3},
  pages = {026180160},
  doi = {10.36922/ijb026180160}
}
Kostenlos starten →