EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering

Hu Xulin, Li Hu, Qiao Liang, Yang Shuhao, Wu Haoming, Peng Chao, Zhang Yamei, Lan Hai, Yang Hua, Li Kainan

International Journal of Bioprinting · 19.01.2023 · 9 (2) · 673

DOI: 10.18063/ijb.v9i2.673 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 19.01.2023. Verfasst von Hu Xulin und 9 weiteren Autor:innen. Beteiligte Einrichtung: Clinical Medical College and Affiliated Hospital of Chengdu University, Chengdu University, Chengdu 610081, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Human bone is composed of cortical bone and cancellous bone. The interior portion of natural bone is cancellous with a porosity of 50%–90%, but the outer layer is made of dense cortical bone, of which porosity was not higher than 10%. Porous ceramics were expected to be research hotspot in bone tissue engineering by virtue of their similarity to the mineral constituent and physiological structure of human bone. However, it is challenging to utilize conventional manufacturing methods to fabricate porous structures with precise shapes and pore sizes. Three-dimensional (3D) printing of ceramics is currently the latest research trend because it has many advantages in the fabrication of porous scaffolds, which can meet the requirements of cancellous bone strength, arbitrarily complex shapes, and individualized design. In this study, β-tricalcium phosphate (β-TCP)/titanium dioxide (TiO2 ) porous ceramics scaffolds were fabricated by 3D gel-printing sintering for the first time. The chemical constituent, microstructure, and mechanical properties of the 3D-printed scaffolds were characterized. After sintering, a uniform porous structure with appropriate porosity and pore sizes was observed. Besides, biological mineralization activity and biocompatibility were evaluated by in vitro cell assay. The results demonstrated that the incorporation of TiO2  (5 wt%) significantly improved the compressive strength of the scaffolds, with an increase of 283%. Additionally, the in vitro results showed that the β-TCP/TiO2  scaffold had no toxicity. Meanwhile, the adhesion and proliferation of MC3T3-E1 cells on scaffolds were desirable, revealing that the β-TCP/TiO2 scaffolds can be used as a promising candidate for repair scaffolding in orthopedics and traumatology. 

Schlagwörter

Stichwörter der Autor:innen

3D printingBone tissue engineeringPorous scaffoldsTitanium dioxideβ-tricalcium phosphate

Autor:innen und Institutionen

  • Clinical Medical College and Affiliated Hospital of Chengdu University, Chengdu University, Chengdu 610081, China.
  • The First Affiliated Hospital, and College of Clinical Medicine of Henan University of Science and Technology, Luoyang 471003, China.
  • West China School of Public Health of Sichuan University, Chengdu 610041, China.

Zitieren

APA

Xulin, H., Hu, L., Liang, Q., Shuhao, Y., Haoming, W., Chao, P., Yamei, Z., Hai, L., Hua, Y., & Kainan, L. (2023). Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering. International Journal of Bioprinting, 9(2), 673. https://doi.org/10.18063/ijb.v9i2.673

Vancouver

Xulin H, Hu L, Liang Q, Shuhao Y, Haoming W, Chao P, et al. Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering. International Journal of Bioprinting. 2023;9(2):673. doi:10.18063/ijb.v9i2.673

BibTeX
@article{Xulin2023,
  author = {Xulin, Hu and Hu, Li and Liang, Qiao and Shuhao, Yang and Haoming, Wu and Chao, Peng and Yamei, Zhang and Hai, Lan and Hua, Yang and Kainan, Li},
  title = {Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering},
  journal = {International Journal of Bioprinting},
  year = {2023},
  volume = {9},
  number = {2},
  pages = {673},
  doi = {10.18063/ijb.v9i2.673}
}
Kostenlos starten →