3D-printed flexible piezoelectric scaffolds restore load-bearing function of regenerated bone
Nano Research · 26.10.2026
DOI: 10.26599/nr.2026.94909292 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nano Research, online erschienen am 26.10.2026. Verfasst von Suyun Li und 7 weiteren Autor:innen.
Abstract (Originalsprache)
Flexible piezoelectric scaffolds can conform to irregular bone defects and deliver wireless electrical stimulation, yet whether their mechanical and electrical functions persist throughout the months-long course of bone remodeling, as well as whether the regenerated bone ultimately recovers load-bearing function, remains unresolved. Here, we report PUA/BTO/β-TCP elastomer–ceramic piezoelectric scaffolds fabricated by digital light processing (DLP) into a triply periodic minimal surface (TPMS) architecture. Calcination of BTO increased its ferroelectric tetragonal phase content and enhanced the piezoelectric coefficient d33 of the composites by up to 44.3%. The scaffolds combined full elastic recovery after 50% compression with durable mechanoelectrical performance: after 28 days of immersion in simulated body fluid, their quasi-static and cyclic mechanical properties remained essentially unchanged, and d33 remained above its initial value. Under ultrasound excitation, the scaffolds significantly enhanced osteoblast proliferation and osteogenic differentiation in vitro and accelerated femoral defect repair in rats, with the bone volume fraction reaching approximately 70% at 8 weeks, versus below 13% for controls. Critically, biomechanical testing at 8 weeks post-implantation showed that the repaired femur withstood a fracture limit load approximately 9.1% higher than that of intact native bone, survived cyclic compression at 70% of the limit load without detectable cracking, and exhibited crack arrest at the scaffold–bone interface, which was direct evidence of stable mechanical integration. We term the concurrent retention of mechanical resilience and piezoelectric output during remodeling, together with stable scaffold–bone mechanical integration, mechanoelectrical adaptation, and propose it as a design principle that shifts bone-scaffold development from short-term osteoinductivity toward sustained in vivo functionality.
Zitieren
APA
Li, S., Shan, Y., Wang, Y., Shi, Z., Dong, Y., Zhao, L., He, R., & Li, Y. (2026). 3D-printed flexible piezoelectric scaffolds restore load-bearing function of regenerated bone. Nano Research. https://doi.org/10.26599/nr.2026.94909292
Vancouver
Li S, Shan Y, Wang Y, Shi Z, Dong Y, Zhao L, et al. 3D-printed flexible piezoelectric scaffolds restore load-bearing function of regenerated bone. Nano Research. 2026. doi:10.26599/nr.2026.94909292
BibTeX
@article{Li2026,
author = {Li, Suyun and Shan, Yanbo and Wang, Yixuan and Shi, Zengqin and Dong, Yifeng and Zhao, Lisheng and He, Rujie and Li, Ying},
title = {3D-printed flexible piezoelectric scaffolds restore load-bearing function of regenerated bone},
journal = {Nano Research},
year = {2026},
doi = {10.26599/nr.2026.94909292}
}
EUVIMED