EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of the Printing Angle on the Accuracy of 3D-Printed Interim Fixed Partial Dentures: An In Vitro Study

Luciana Maria Goguţā, Florin Topalā, Andrei Faur, Anca Jivānescu

Timisoara Medical Journal · 2023

DOI: 10.35995/20230105 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Timisoara Medical Journal, 2023. Verfasst von Luciana Maria Goguţā und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The aim of this study was to assess the accuracy of printed interim fixed partial dentures (i-DPSs) fabricated on 3D-printed models using different printing angles. Materials and Methods: Six printing angles were chosen, namely 90°, 75°, 60°, 45°, 30° and 15°, to fabricate sixty i-DPSs, ten for each. The measurements were performed at 100 points cervical and 100 points axial occlusal. Statistical analyses were carried out using Med Calc software and the Kolmogorov–Smirnov and Kruskal–Wallis tests.

Results

The marginal fit ranged between 39.302 µm and 74.470 µm, with the best values for the 60° (39.302 µm) and 30° (43.287 µm) printing angles. The mean values for the internal fit were between 72.876 µm and 114.26 µm, with the best values for the 30° (72.876 µm) and 60° (78.049 µm) printing angles. The Kruskal–Wallis test returned a p value of p < 0.0001.

Zitieren

APA

Goguţā, L. M., Topalā, F., Faur, A., & Jivānescu, A. (2023). Influence of the Printing Angle on the Accuracy of 3D-Printed Interim Fixed Partial Dentures: An In Vitro Study. Timisoara Medical Journal. https://doi.org/10.35995/20230105

Vancouver

Goguţā LM, Topalā F, Faur A, Jivānescu A. Influence of the Printing Angle on the Accuracy of 3D-Printed Interim Fixed Partial Dentures: An In Vitro Study. Timisoara Medical Journal. 2023. doi:10.35995/20230105

BibTeX
@article{Gogu2023,
  author = {Goguţā, Luciana Maria and Topalā, Florin and Faur, Andrei and Jivānescu, Anca},
  title = {Influence of the Printing Angle on the Accuracy of 3D-Printed Interim Fixed Partial Dentures: An In Vitro Study},
  journal = {Timisoara Medical Journal},
  year = {2023},
  doi = {10.35995/20230105}
}
Kostenlos starten →