EUVIMEDEUVIMED entdecken
Crossref

FEM Study on the Efficiency of 3D Printed Gears

Valentin Mereuță, Andreea Sandu, Elena Felicia Beznea, Nicușor Baroiu

Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building · 20.01.2026 · (43) · 5-12

DOI: 10.35219/tmb.2025.1.01 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building, online erschienen am 20.01.2026. Verfasst von Valentin Mereuță und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the 3D modeling and static structural analysis in ANSYS of a spur gear set manufactured from four different materials: two conventional steels, 36Mn5 and 18CrNiMo7 and two 3D printable Ultrafuse 17-4PH and 316L. The study aimed to compare maximum elastic deformations, Von Mises stresses, and material-specific mechanical properties in order to evaluate their suitability for gear applications. Significant differences were observed in hardness, yield strength, and wear resistance. The carburized steel 18CrNiMo7 exhibited superior strength and hardness, confirming its suitability for heavy-duty industrial transmissions, while 36Mn5 proved adequate for moderate-load applications. Among the Ultrafuse materials, 17-4PH demonstrated a favorable compromise, with acceptable ductility and the potential for post-printing heat treatment, making it suitable for functional prototypes and gears with moderate loads. The analysis concludes that while Ultrafuse materials can be effectively employed in prototyping and testing, carburized steel 18CrNiMo7 remains the recommended choice for industrial series production of gears subjected to high loads and wear.

Zitieren

APA

Mereuță, V., Sandu, A., Beznea, E. F., & Baroiu, N. (2026). FEM Study on the Efficiency of 3D Printed Gears. Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building, 5-12. https://doi.org/10.35219/tmb.2025.1.01

Vancouver

Mereuță V, Sandu A, Beznea EF, Baroiu N. FEM Study on the Efficiency of 3D Printed Gears. Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building. 2026:5-12. doi:10.35219/tmb.2025.1.01

BibTeX
@article{Mereu2026,
  author = {Mereuță, Valentin and Sandu, Andreea and Beznea, Elena Felicia and Baroiu, Nicușor},
  title = {FEM Study on the Efficiency of 3D Printed Gears},
  journal = {Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building},
  year = {2026},
  number = {43},
  pages = {5--12},
  doi = {10.35219/tmb.2025.1.01}
}
Kostenlos starten →