Comparative Study of the Geometric Accuracy of 3D-Printed Polyamide CF15 and Injection-Molded POM Spur Gears
Materials · 28.05.2026 · 19 (11) · 2297
DOI: 10.3390/ma19112297 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.05.2026. Verfasst von Valeri Bakardzhiev und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanics, Faculty of Mechanical Engineering, Technical University Sofia, Plovdiv Branch, 25 Tsanko Dyustabanov Str., 4000 Plovdiv, Bul…. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.
Abstract (Originalsprache)
The accuracy of gears is a determining factor for their functionality, reliability, and durability in various mechanical systems. Two widely used technologies for producing plastic gears are injection molding and 3D printing, each having its own advantages and limitations. Injection molding is a traditional method for mass production that offers high productivity but is sensitive to parameters such as temperature, pressure, and cooling, which can lead to shrinkage and dimensional instability. On the other hand, 3D printing is gaining popularity due to its flexibility, rapid prototyping capabilities, and the possibility of producing small series without the need for expensive tooling. In the present study, the accuracy of plastic gears with module 2 and module 3, manufactured using both technologies, was investigated and compared. Measurements were performed on three main parameters: span measurement, chordal tooth thickness, and measurement over pins. The obtained data were statistically analyzed and classified according to the DIN 3962/3963 and ISO 628 accuracy standards. 3D-printed gears demonstrated lower standard deviation (0.0079–0.0083 mm) and improved repeatability compared with injection-molded gears (0.0131–0.0189 mm), achieving DIN 10–14 accuracy classes. Unlike previous studies that compare different materials or technologies separately, this work directly compares both simultaneously under controlled conditions, revealing that material selection (CF-reinforced vs. unfilled POM) may influence dimensional outcomes as strongly as the manufacturing method. These findings provide practical guidance for selecting production routes for low-to-medium precision polymer gears under the tested conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanics, Faculty of Mechanical Engineering, Technical University Sofia, Plovdiv Branch, 25 Tsanko Dyustabanov Str., 4000 Plovdiv, Bulgaria.
- Department of Manufacturing Engineering and Technologies, Faculty of Mechanical Engineering, Technical University Sofia, Plovdiv Branch, 25 Tsanko Dyustabanov Str., 4000 Plovdiv, Bulgaria.
- Center of Competence "Smart Mechatronic, Eco- and Energy-Saving Systems and Technologies", 4000 Plovdiv, Bulgaria.
ORCID-Profile: Valeri Bakardzhiev, Sabi Sabev
Förderung
- European Regional Development Fund
Zitieren
APA
Bakardzhiev, V., Chukalov, K., Sabev, S., Kasabov, P., & Izmirliyan, A. (2026). Comparative Study of the Geometric Accuracy of 3D-Printed Polyamide CF15 and Injection-Molded POM Spur Gears. Materials, 19(11), 2297. https://doi.org/10.3390/ma19112297
Vancouver
Bakardzhiev V, Chukalov K, Sabev S, Kasabov P, Izmirliyan A. Comparative Study of the Geometric Accuracy of 3D-Printed Polyamide CF15 and Injection-Molded POM Spur Gears. Materials. 2026;19(11):2297. doi:10.3390/ma19112297
BibTeX
@article{Bakardzhiev2026,
author = {Bakardzhiev, Valeri and Chukalov, Konstantin and Sabev, Sabi and Kasabov, Plamen and Izmirliyan, Agop},
title = {Comparative Study of the Geometric Accuracy of 3D-Printed Polyamide CF15 and Injection-Molded POM Spur Gears},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2297},
doi = {10.3390/ma19112297}
}
EUVIMED