Structural Optimization Design of a Skateboard Chassis Based on Universal Kriging–NSGA-II–TOPSIS
World Electric Vehicle Journal · 28.06.2026 · 17 (7) · 334
DOI: 10.3390/wevj17070334 ↗Kurz gefasst
Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 28.06.2026. Verfasst von Jianshe Zhang und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Scientific Research Project of Higher Education Institutions in Henan Province.
Abstract (Originalsprache)
To achieve coordinated optimization of lightweighting and static–dynamic performance for a skateboard chassis, this paper proposes a multi-objective optimization method based on Universal Kriging, NSGA-II, and TOPSIS. A three-dimensional parametric model of the skateboard chassis structure for electric commercial vehicles was established based on a modular design philosophy, and modal and static analyses under four typical operating conditions were conducted. Six key variables were identified through parameter sensitivity analysis, and a surrogate model was constructed using the optimal Latin hypercube sampling method and the Universal Kriging model. The NSGA-II algorithm was used to solve the multi-objective optimization model and obtain a set of Pareto optimal solutions, from which the optimal compromise solution was selected using the entropy-weighted TOPSIS multi-criteria decision-making method. The optimized design achieved the objectives of reducing the skateboard chassis mass by 2.02%, decreasing the maximum deformation under bending conditions by 19.16%, and increasing the first-order natural frequency by 2.24%, thereby effectively improving lightweight, stiffness, and dynamic response performance of the skateboard chassis. This method integrates modular design with multi-objective optimization, providing a theoretical framework and technical pathway for the structural optimization design of a skateboard chassis.
Förderung
- Key Scientific Research Project of Higher Education Institutions in Henan Province
Zitieren
APA
Zhang, J., Zhang, G., & Shen, M. (2026). Structural Optimization Design of a Skateboard Chassis Based on Universal Kriging–NSGA-II–TOPSIS. World Electric Vehicle Journal, 17(7), 334. https://doi.org/10.3390/wevj17070334
Vancouver
Zhang J, Zhang G, Shen M. Structural Optimization Design of a Skateboard Chassis Based on Universal Kriging–NSGA-II–TOPSIS. World Electric Vehicle Journal. 2026;17(7):334. doi:10.3390/wevj17070334
BibTeX
@article{Zhang2026,
author = {Zhang, Jianshe and Zhang, Guohui and Shen, Minggang},
title = {Structural Optimization Design of a Skateboard Chassis Based on Universal Kriging–NSGA-II–TOPSIS},
journal = {World Electric Vehicle Journal},
year = {2026},
volume = {17},
number = {7},
pages = {334},
doi = {10.3390/wevj17070334}
}
EUVIMED