Multi-Objective Optimization of Automotive Stamping Process Based on Orthogonal Experimental Design and BPNN-NSGA-II-TOPSIS Framework
Processes · 13.07.2026 · 14 (14) · 2280
DOI: 10.3390/pr14142280 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 13.07.2026. Verfasst von Weixiang Qiu und 4 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Guangdong Province General University Innovation Team Project, Postgraduate Education Innovation Project of Guangdong Ocean University.
Abstract (Originalsprache)
To address the multi-objective optimization of stamping process parameters for vehicle components, a hybrid framework coupling Dynaform simulations, Orthogonal Experimental Design, BPNN, NSGA-II, and TOPSIS was proposed. Taking car door accessories as a case study, OED was utilized to investigate the interacting effects of blank holder force, friction coefficient, stamping speed, and die clearance on the maximum thinning and thickening rates. The simulated data trained a BPNN to construct the highly non-linear mapping relationships. Subsequently, the NSGA-II algorithm generated the Pareto optimal frontier, and TOPSIS objectively selected the best compromise process parameters: a blank holder force of 43,113 N, a friction coefficient of 0.13, a stamping speed of 2496 mm/s, and a die clearance of 1.0 mm. Applying this combination effectively constrained the maximum thinning and thickening rates to 41.4% and 16.8% respectively. The BPNN relative prediction errors against numerical validation were merely 0.0691% and 6.9930%, fully verifying the high fidelity and effectiveness of the proposed optimization methodology.
Förderung
- National Key R&D Program of China
- Guangdong Province General University Innovation Team Project
- Postgraduate Education Innovation Project of Guangdong Ocean University
- Natural Science Foundation of Guangdong Province
- Undergraduate Innovation Team Project of Guangdong Ocean University
- National Training Program of Innovation and Entrepreneurship for Undergraduates
Zitieren
APA
Qiu, W., Chen, L., Liu, Q., Liu, Z., & Su, J. (2026). Multi-Objective Optimization of Automotive Stamping Process Based on Orthogonal Experimental Design and BPNN-NSGA-II-TOPSIS Framework. Processes, 14(14), 2280. https://doi.org/10.3390/pr14142280
Vancouver
Qiu W, Chen L, Liu Q, Liu Z, Su J. Multi-Objective Optimization of Automotive Stamping Process Based on Orthogonal Experimental Design and BPNN-NSGA-II-TOPSIS Framework. Processes. 2026;14(14):2280. doi:10.3390/pr14142280
BibTeX
@article{Qiu2026,
author = {Qiu, Weixiang and Chen, Liankun and Liu, Qiang and Liu, Zheng and Su, Junlin},
title = {Multi-Objective Optimization of Automotive Stamping Process Based on Orthogonal Experimental Design and BPNN-NSGA-II-TOPSIS Framework},
journal = {Processes},
year = {2026},
volume = {14},
number = {14},
pages = {2280},
doi = {10.3390/pr14142280}
}
EUVIMED