Lightweight Design and Research of Electric Towing Winch Based on Kriging-NSGA-III-TOPSIS Multi-Objective Optimization Technology
Machines · 06.10.2025 · 13 (10) · 922
DOI: 10.3390/machines13100922 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 06.10.2025. Verfasst von Quanliang Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Department of Science and Technology, Zhoushan Municipal Science and Technology Bureau.
Abstract (Originalsprache)
To address the challenges of weight redundancy, low material utilization, and excessive performance margins in the design of electric cable-hauling machines, this study proposes a novel multi-objective optimization framework. The framework integrates Latin hypercube experimental design, Kriging surrogate modeling, a Non-dominated Sorting Genetic Algorithm III (NSGA-III), and a coupled TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) approach. A high-fidelity finite element model based on extreme operating conditions was established to simulate the performance of the electric towing winch. The Kriging model was employed to replace time-consuming finite element calculations, significantly improving computational efficiency. The NSGA-III algorithm was then utilized to search for the Pareto front, identifying a set of optimal solutions that balance multiple design objectives. Finally, the TOPSIS method was applied to select the most preferable solution from the Pareto front. The results demonstrate a 7.32% reduction in the overall mass of the towing winch, a 7.34% increase in the safety factor, and a 4.57% reduction in maximum structural deformation under extreme operating conditions. These findings validate the effectiveness of the proposed Kriging-NSGA-III-TOPSIS strategy for lightweight design of ship deck winch machinery.
Förderung
- Zhejiang Provincial Department of Science and Technology
- Zhoushan Municipal Science and Technology Bureau
Zitieren
APA
Liu, Q., Feng, L., Wang, Y., Lin, J., & Zhu, L. (2025). Lightweight Design and Research of Electric Towing Winch Based on Kriging-NSGA-III-TOPSIS Multi-Objective Optimization Technology. Machines, 13(10), 922. https://doi.org/10.3390/machines13100922
Vancouver
Liu Q, Feng L, Wang Y, Lin J, Zhu L. Lightweight Design and Research of Electric Towing Winch Based on Kriging-NSGA-III-TOPSIS Multi-Objective Optimization Technology. Machines. 2025;13(10):922. doi:10.3390/machines13100922
BibTeX
@article{Liu2025,
author = {Liu, Quanliang and Feng, Lu and Wang, Ya and Lin, Ji and Zhu, Linsen},
title = {Lightweight Design and Research of Electric Towing Winch Based on Kriging-NSGA-III-TOPSIS Multi-Objective Optimization Technology},
journal = {Machines},
year = {2025},
volume = {13},
number = {10},
pages = {922},
doi = {10.3390/machines13100922}
}
EUVIMED