EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Skew Angle Optimization for Cogging Torque Reduction in 12-Pole/15-Slot Axial Flux PMSMs

Ice Poonphol, Padej Pao-la-or

World Electric Vehicle Journal · 06.04.2026 · 17 (4) · 192

DOI: 10.3390/wevj17040192 ↗

Kurz gefasst

Fachartikel in der Zeitschrift World Electric Vehicle Journal, online erschienen am 06.04.2026. Verfasst von Ice Poonphol und 1 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SUT Research and Development Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Axial Flux Permanent Magnet Synchronous Motors (AFPMSMs) are gaining increasing attention for their application in electric vehicle (EV) drive systems. Their high torque density and compact axial geometry make them attractive for high-performance EV drive systems. However, cogging torque remains a major challenge, degrading low-speed drivability, noise performance, and control stability. This article proposes a magnet skew on rotor modulation structure using a genetic algorithm (GA) to reduce cogging torque in AFPMSMs utilizing a 12/15 non-integer pole/slot arrangement. The objective of optimization is to simultaneously reduce cogging torque under identical electromagnetic constraints. A complete three-dimensional finite element model (3D-FEM) incorporating nonlinear magnetic material properties has been developed to evaluate the electromagnetic field distribution and torque components. The results indicate that a 12/15 non-integer pole/slot arrangement improves harmonic distribution and extends the operating range with lower cogging torque compared to integer pole/slot designs. Combined with GA-optimized skew angles, this reduces peak-to-peak cogging torque to less than 50%. This design is ideally suited for the traction requirements of electric vehicles, including premium electric vehicles where smooth operation at low speeds is critical.

Förderung

  • SUT Research and Development Fund

Zitieren

APA

Poonphol, I., & Pao-la-or, P. (2026). Skew Angle Optimization for Cogging Torque Reduction in 12-Pole/15-Slot Axial Flux PMSMs. World Electric Vehicle Journal, 17(4), 192. https://doi.org/10.3390/wevj17040192

Vancouver

Poonphol I, Pao-la-or P. Skew Angle Optimization for Cogging Torque Reduction in 12-Pole/15-Slot Axial Flux PMSMs. World Electric Vehicle Journal. 2026;17(4):192. doi:10.3390/wevj17040192

BibTeX
@article{Poonphol2026,
  author = {Poonphol, Ice and Pao-la-or, Padej},
  title = {Skew Angle Optimization for Cogging Torque Reduction in 12-Pole/15-Slot Axial Flux PMSMs},
  journal = {World Electric Vehicle Journal},
  year = {2026},
  volume = {17},
  number = {4},
  pages = {192},
  doi = {10.3390/wevj17040192}
}
Kostenlos starten →