EUVIMEDEUVIMED entdecken
Crossref

Transfer Learning-Based Design Method for Cogging Torque Reduction in PMSM With Step-Skew Considering 3-D Leakage Flux

Yun-Jae Won, Jae-Hyun Kim, Soo-Hwan Park, Ji-Hyeon Lee, Soo-Min An, Doo-Young Kim, Myung-Seop Lim

IEEE Transactions on Magnetics · 2023-11 · 59 (11) · 1-5

DOI: 10.1109/tmag.2023.3294601 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Magnetics, 2023-11. Verfasst von Yun-Jae Won und 6 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 10 Literaturangaben. Gefördert von: National Research Foundation of Korea, Korea Government [Ministry of Science and ICT (MSIT)].

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Step-skew is a common technique for eliminating the cogging torque of a target harmonic order in permanent magnet synchronous motors (PMSMs). However, when step-skew is applied to the rotor, the cogging torque of the target harmonic order is not completely eliminated due to 3-D leakage flux. Therefore, the 3-D leakage flux should be considered in designing a PMSM with step-skew for cogging torque reduction. The most accurate way to consider the 3-D leakage flux is to perform 3-D finite element analysis (FEA), but it has the disadvantage of high computation time. To resolve this challenge, this article proposes a design method that utilizes transfer learning to reduce the time for 3-D FEA while maintaining accuracy. Through the proposed method, a large amount of 2-D FEA-based data and a small amount of 3-D FEA-based data are used instead of a large amount of 3-D FEA-based data, with similar accuracy as using a large amount of 3-D FEA-based data, and the computational time is highly reduced. Finally, a prototype is fabricated and tested to verify the validity of the proposed design method for cogging torque reduction.

Förderung

  • National Research Foundation of Korea
  • Korea Government [Ministry of Science and ICT (MSIT)]

Zitieren

APA

Won, Y., Kim, J., Park, S., Lee, J., An, S., Kim, D., & Lim, M. (2023). Transfer Learning-Based Design Method for Cogging Torque Reduction in PMSM With Step-Skew Considering 3-D Leakage Flux. IEEE Transactions on Magnetics, 59(11), 1-5. https://doi.org/10.1109/tmag.2023.3294601

Vancouver

Won Y, Kim J, Park S, Lee J, An S, Kim D, et al. Transfer Learning-Based Design Method for Cogging Torque Reduction in PMSM With Step-Skew Considering 3-D Leakage Flux. IEEE Transactions on Magnetics. 2023;59(11):1-5. doi:10.1109/tmag.2023.3294601

BibTeX
@article{Won2023,
  author = {Won, Yun-Jae and Kim, Jae-Hyun and Park, Soo-Hwan and Lee, Ji-Hyeon and An, Soo-Min and Kim, Doo-Young and Lim, Myung-Seop},
  title = {Transfer Learning-Based Design Method for Cogging Torque Reduction in PMSM With Step-Skew Considering 3-D Leakage Flux},
  journal = {IEEE Transactions on Magnetics},
  year = {2023},
  volume = {59},
  number = {11},
  pages = {1--5},
  doi = {10.1109/tmag.2023.3294601}
}
Kostenlos starten →