EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pole Number Selection Criterion for Cogging Torque Reduction of PMSMs Induced by Nonideal Airgap Permeance Harmonics

Duo Wu, Chao Zhang, Jinwen Du, Zheng Wu, Wei Hua

IET Electric Power Applications · 2026-01 · 20 (1)

DOI: 10.1049/elp2.70190 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Electric Power Applications, online erschienen am 14.05.2026. Verfasst von Duo Wu und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cogging torque is a key performance of permanent magnet synchronous machines (PMSMs) as a dominated component of torque pulsation and speed ripple. Its reduction has attracted considerable attention for the stable operation of machine propeller systems in electrified underwater propulsion applications. For a PMSM with Q s stator slots and p rotor pole pairs, additional (2 mp ) th ( m = 1, 2, …) harmonics inherently exist in the resultant cogging torque. Normally, these harmonics are mainly caused by unavoidable manufacturing tolerances of stator, and therefore, it is a challenge to reduce them during design stage. In this paper, the generation mechanism of (2 mp ) th cogging torque harmonics is first investigated, and a theoretical relationship between the squared magnetomotive force (MMF) harmonics due to PMs and the cogging torque harmonics is established. Secondly, an optimal pole number selection criterion is proposed to reduce the (2 mp ) th cogging torque harmonics induced by nonideal permeance harmonics. The results indicate that a smaller pole number leads to the lower amplitudes of (2 mp ) th cogging torque harmonics, which contrasts with the conventional slot–pole combination strategies aiming at minimising an ideal cogging torque. The effectiveness of the proposed selection criterion is verified by finite element (FE) simulation. Finally, three rotors with different pole numbers, that is, p = 10, 14 and 16, are built and assembled with a common 12‐slot stator. The experimental results of cogging torque of each PMSM validate the proposed method.

Zitieren

APA

Wu, D., Zhang, C., Du, J., Wu, Z., & Hua, W. (2026). Pole Number Selection Criterion for Cogging Torque Reduction of PMSMs Induced by Nonideal Airgap Permeance Harmonics. IET Electric Power Applications, 20(1). https://doi.org/10.1049/elp2.70190

Vancouver

Wu D, Zhang C, Du J, Wu Z, Hua W. Pole Number Selection Criterion for Cogging Torque Reduction of PMSMs Induced by Nonideal Airgap Permeance Harmonics. IET Electric Power Applications. 2026;20(1). doi:10.1049/elp2.70190

BibTeX
@article{Wu2026,
  author = {Wu, Duo and Zhang, Chao and Du, Jinwen and Wu, Zheng and Hua, Wei},
  title = {Pole Number Selection Criterion for Cogging Torque Reduction of PMSMs Induced by Nonideal Airgap Permeance Harmonics},
  journal = {IET Electric Power Applications},
  year = {2026},
  volume = {20},
  number = {1},
  doi = {10.1049/elp2.70190}
}
Kostenlos starten →