EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Construction-Monitoring Analysis of a Symmetrical Rigid Frame Tied Steel Box Arch Bridge in Southwest China Based on Segmental Assembly Technique

Yuanchong Zhang, Longlin Wang, Yu Nong, Wensheng Wang

Symmetry · 18.07.2023 · 15 (7) · 1437

DOI: 10.3390/sym15071437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Symmetry, online erschienen am 18.07.2023. Verfasst von Yuanchong Zhang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Science and Technology Key R&D Project of Guangxi, Scientific Research Project of the Department of Education of Jilin Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tied steel box arch bridges are increasingly being used due to their attractive appearance, high load-bearing capacity, and good stress performance. Their construction involves multiple processes and factors. Construction monitoring can ensure that such a bridge remains in its intended stress and linear states during and after construction. This helps to minimize deviations from the design state at every stage of construction. Using the segmental assembly construction technique, this study conducted construction monitoring of the alignment and force at each stage of the reconstruction of bridges using MIDAS Civil software. The construction monitoring analysis indicated that the arch rib and lattice beam were correctly placed, thereby meeting the specified requirements for arch rib closure. Displacement errors between the measured and theoretical values at each stage of construction fell within an allowable range, resulting in overall smooth bridge alignment. The measured stress in the main arch and the lattice beam generally corresponded to the theoretical stress derived from the control section stress of the entire bridge. The deviation between the cable force of the suspender and the tie rod and theoretical value fell within 10%, indicating good stress reserve. The symmetrical monitoring points in the analyzed rigid-frame tied steel box arch bridges exhibited symmetrical displacement, stress, and cable force results under various working conditions. This observation further confirms the effectiveness of construction monitoring using the segmental assembly technique.

Förderung

  • National Key R&D Program of China
  • Science and Technology Key R&D Project of Guangxi
  • Scientific Research Project of the Department of Education of Jilin Province
  • Postdoctoral Researcher Selection Funding Project of Jilin Province

Zitieren

APA

Zhang, Y., Wang, L., Nong, Y., & Wang, W. (2023). Construction-Monitoring Analysis of a Symmetrical Rigid Frame Tied Steel Box Arch Bridge in Southwest China Based on Segmental Assembly Technique. Symmetry, 15(7), 1437. https://doi.org/10.3390/sym15071437

Vancouver

Zhang Y, Wang L, Nong Y, Wang W. Construction-Monitoring Analysis of a Symmetrical Rigid Frame Tied Steel Box Arch Bridge in Southwest China Based on Segmental Assembly Technique. Symmetry. 2023;15(7):1437. doi:10.3390/sym15071437

BibTeX
@article{Zhang2023,
  author = {Zhang, Yuanchong and Wang, Longlin and Nong, Yu and Wang, Wensheng},
  title = {Construction-Monitoring Analysis of a Symmetrical Rigid Frame Tied Steel Box Arch Bridge in Southwest China Based on Segmental Assembly Technique},
  journal = {Symmetry},
  year = {2023},
  volume = {15},
  number = {7},
  pages = {1437},
  doi = {10.3390/sym15071437}
}
Kostenlos starten →