EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Methods for Estimating Human Joint and Endpoint Stiffness

Salvatore Maria Li Gioi iD, Francesca Cordella iD, Loredana Zollo

Sensors · 07.11.2026 · 26 (21) · 7052

DOI: 10.3390/s26217052 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 07.11.2026. Verfasst von Salvatore Maria Li Gioi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Research Unit of Advanced Robotics and Human-Centred Technologies, Università Campus Bio-Medico di Roma, 00128 Rome, Italy. Hauptthemen laut MEDLINE: Joints. Die Arbeit nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Italian Ministry of Research, Fondazione Compagnia di San Paolo.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical stiffness is the displacement-dependent component of mechanical impedance. In joint coordinates, it describes the local mapping from small angular displacements to changes in joint torque; when using Cartesian coordinates, endpoint stiffness describes the corresponding mapping from small spatial displacements to changes in endpoint force. Both quantities are relevant to neuromechanical assessment and to applications in rehabilitation and physical human–robot interaction. However, selecting an estimation method remains difficult because stiffness is not estimated and validated consistently across studies. This review provides an application-oriented synthesis of methods for estimating human joint and endpoint stiffness. Following study inclusion, methods were classified along a mutually exclusive primary axis as either perturbation-response identification, in which stiffness is derived from the mechanical response to a deliberately imposed perturbation used for identification, or non-perturbative inference, in which stiffness is inferred from measurements acquired without such an identification perturbation. Experimental conditions and sensing or modeling choices were retained as orthogonal descriptors rather than additional methodological classes. Because standardized head-to-head comparisons against common reference measurements remain scarce, the available evidence does not support a universal ranking of estimation accuracy. The proposed benchmarking framework and decision tree, therefore, match method selection to application requirements rather than prescribing a globally superior approach. The synthesis further shows that reproducible use requires a precise definition of what is estimated and under which conditions, together with sufficient methodological detail to replicate the estimation and validation procedures.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

JointsHumansBiomechanical PhenomenaTorque

Stichwörter der Autor:innen

EMG-driven modelingbiomechanicsendpoint stiffnessjoint stiffnessmachine learningmechanical impedancemusculoskeletal modelingrehabilitation roboticssystem identification

Autor:innen und Institutionen

  • Research Unit of Advanced Robotics and Human-Centred Technologies, Università Campus Bio-Medico di Roma, 00128 Rome, Italy.

ORCID-Profile: Salvatore Maria Li Gioi, Francesca Cordella

Förderung

  • Italian Ministry of Research
  • Fondazione Compagnia di San Paolo

Zitieren

APA

Li Gioi, S. M., Cordella, F., & Zollo, L. (2026). Methods for Estimating Human Joint and Endpoint Stiffness. Sensors, 26(21), 7052. https://doi.org/10.3390/s26217052

Vancouver

Li Gioi SM, Cordella F, Zollo L. Methods for Estimating Human Joint and Endpoint Stiffness. Sensors. 2026;26(21):7052. doi:10.3390/s26217052

BibTeX
@article{LiGioi2026,
  author = {Li Gioi, Salvatore Maria and Cordella, Francesca and Zollo, Loredana},
  title = {Methods for Estimating Human Joint and Endpoint Stiffness},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {21},
  pages = {7052},
  doi = {10.3390/s26217052}
}
Kostenlos starten →