Repetitive Lifting Motion Predictions Considering Muscle Fatigue
Journal of Biomechanical Engineering · 2025
DOI: 10.1115/1.4068423 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2025. Verfasst von Yujiang Xiang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Aerospace Engineering, Oklahoma State University, Stillwater, OK 74078. Hauptthemen laut MEDLINE: Muscle Fatigue, Lifting, Models, Biological, Muscle, Skeletal. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Division of Chemical, Bioengineering, Environmental, and Transport Systems.
Abstract (Originalsprache)
This paper predicts the optimal motion for a repetitive lifting task considering muscle fatigue. The Denavit–Hartenberg (DH) representation is employed to characterize the two-dimensional (2D) digital human model with 10 degrees-of-freedom (DOFs). Two joint-based muscle fatigue models, i.e., a three-compartment controller (3CC) muscle fatigue model (validated for isometric tasks) and a four-compartment controller with augmented recovery (4CCr) muscle fatigue model (validated for dynamic tasks), are utilized to account for the fatigue effect due to the repetitive motion. The lifting problem is formulated mathematically as an optimization problem, with the objective of minimizing dynamic effort and joint acceleration subjected to both physical and task-specific constraints. The design variables include joint angle profiles, discretized by quartic B-splines, and the control points of the profiles of the fatigue compartments associated with major body joints (spinal, shoulder, elbow, hip, and knee joints). The outcomes of the simulation encompass profiles of joint angles, joint torques, and the advancement of joint fatigue. It is notable that the profiles of joint angles and torques exhibit distinct periodic patterns. Numerical simulations and experiments with a 20 kg box reveal that the maximum predicted lifting cycles are 11 for the 3CC fatigue model and 13 for the 4CCr fatigue model while the experimental result is 13 cycles. The results indicate that the 4CCr muscle fatigue model provides enhanced accuracy over the 3CC model for predicting task duration (number of cycles) of repetitive lifting.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Aerospace Engineering, Oklahoma State University, Stillwater, OK 74078.
- Department of Mechanical Engineering, Texas Tech University, Lubbock, TX 79409.
- Washington State University.
ORCID-Profile: Ritwik Rakshit
Förderung
- Division of Chemical, Bioengineering, Environmental, and Transport Systems
Zitieren
APA
Xiang, Y., Barman, S., Rakshit, R., & Yang, J. (2025). Repetitive Lifting Motion Predictions Considering Muscle Fatigue. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4068423
Vancouver
Xiang Y, Barman S, Rakshit R, Yang J. Repetitive Lifting Motion Predictions Considering Muscle Fatigue. Journal of Biomechanical Engineering. 2025. doi:10.1115/1.4068423
BibTeX
@article{Xiang2025,
author = {Xiang, Yujiang and Barman, Shuvrodeb and Rakshit, Ritwik and Yang, James},
title = {Repetitive Lifting Motion Predictions Considering Muscle Fatigue},
journal = {Journal of Biomechanical Engineering},
year = {2025},
doi = {10.1115/1.4068423}
}
EUVIMED