Printed Thermoresistive Carbon and PEDOT:PSS Temperature Sensors on Different Substrates
Sensors · 31.10.2026 · 26 (21) · 6903
DOI: 10.3390/s26216903 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 31.10.2026. Verfasst von Cláudia S Buga und 1 weiteren Autor:innen. Beteiligte Einrichtung: IPC/LASI-Institute for Polymers and Composites, Associated Laboratory of Intelligence Systems, University of Minho, Campus de Azurém, 4800-058 Guimar…. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ESF - European Social Funding, Foundation for Science and Technology.
Abstract (Originalsprache)
Printed thermoresistive sensors are strongly influenced by the sensing material, substrate, printing process and encapsulation. In this work, PEDOT:PSS temperature sensors were fabricated by inkjet printing on PET and glossy paper, while carbon-based sensors were produced by screen printing on the same substrates. Their morphology, chemical and thermal characteristics, electrical properties, impedance response and thermoresistive performance were systematically compared. PEDOT:PSS exhibited a pronounced substrate dependence: sheet resistance increased from 57.93 ± 13.88 Ω/sq on PET to 5804.75 ± 1732.37 Ω/sq on paper, accompanied by a change from PTC behaviour on PET to NTC behaviour on paper. TCR values changed from +0.176 ± 0.012% °C−1 on PET to −0.594 ± 0.049% °C−1 on paper. In contrast, carbon sensors retained PTC behaviour on both substrates, with TCR values of +1.168 ± 0.093% °C−1 on PET and +1.002 ± 0.097% °C−1 on glossy paper in the unencapsulated condition. Encapsulation reduced the magnitude of the PEDOT:PSS response on both substrates, while for carbon, this effect was directly assessed only on glossy paper, where TCR decreased from +1.002 ± 0.097 to +0.510 ± 0.014% °C−1. The results demonstrate that the combined ink–substrate–printing-process system is decisive in determining the temperature response of printed sensors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- IPC/LASI-Institute for Polymers and Composites, Associated Laboratory of Intelligence Systems, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal.
- DTx Colab-Digital Transformation Collaborative Laboratory, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal.
ORCID-Profile: Cláudia S Buga, Júlio C Viana
Förderung
- ESF - European Social Funding
- Foundation for Science and Technology
Zitieren
APA
Buga, C. S., & Viana, J. C. (2026). Printed Thermoresistive Carbon and PEDOT:PSS Temperature Sensors on Different Substrates. Sensors, 26(21), 6903. https://doi.org/10.3390/s26216903
Vancouver
Buga CS, Viana JC. Printed Thermoresistive Carbon and PEDOT:PSS Temperature Sensors on Different Substrates. Sensors. 2026;26(21):6903. doi:10.3390/s26216903
BibTeX
@article{Buga2026,
author = {Buga, Cláudia S and Viana, Júlio C},
title = {Printed Thermoresistive Carbon and PEDOT:PSS Temperature Sensors on Different Substrates},
journal = {Sensors},
year = {2026},
volume = {26},
number = {21},
pages = {6903},
doi = {10.3390/s26216903}
}
EUVIMED