EUVIMEDEUVIMED entdecken
Crossref

Silver and copper screen‐printed temperature sensors on flexible substrates: The impact of ink sintering conditions and composition

Celina Vaquero, Leire Bilbao, Ana Pérez, Haizea Villaverde, Jon Maudes, Olatz Adarraga, Izaskun Bustero, Miren Hayet, Julen Caballero, Ibai Santamaria

Applied Research · 2024-12 · 3 (6)

DOI: 10.1002/appl.202300138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Research, online erschienen am 12.06.2024. Verfasst von Celina Vaquero und 9 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fully screen‐printed silver and copper temperature sensors were studied up to 100°C. The influence of the processing conditions and the composition of three silver and one copper commercial inks is analyzed in this study. The curing temperature is extremely relevant to stabilize the initial resistance of silver sensors, especially for those printed with the lowest solid content ink. All printed sensors showed good linear behavior in the range of 25–100°C ( R 2 > 0.999) except for those fabricated with the lowest solid content silver ink, which also displayed the highest hysteresis and drift. The temperature coefficient of resistance (TCR) obtained for the copper sensors was 3.367 × 10 −3 K −1 and for the three silver sensors, it ranged between 2.723 × 10 −3 to 2.963 × 10 −3 K −1 . This TCR is higher than values reported for inkjet‐printed resistive temperature detectors. Overall, this work demonstrates that low‐cost, linear, screen‐printed temperature sensors can be successfully fabricated on flexible substrates.

Zitieren

APA

Vaquero, C., Bilbao, L., Pérez, A., Villaverde, H., Maudes, J., Adarraga, O., Bustero, I., Hayet, M., Caballero, J., & Santamaria, I. (2024). Silver and copper screen‐printed temperature sensors on flexible substrates: The impact of ink sintering conditions and composition. Applied Research, 3(6). https://doi.org/10.1002/appl.202300138

Vancouver

Vaquero C, Bilbao L, Pérez A, Villaverde H, Maudes J, Adarraga O, et al. Silver and copper screen‐printed temperature sensors on flexible substrates: The impact of ink sintering conditions and composition. Applied Research. 2024;3(6). doi:10.1002/appl.202300138

BibTeX
@article{Vaquero2024,
  author = {Vaquero, Celina and Bilbao, Leire and Pérez, Ana and Villaverde, Haizea and Maudes, Jon and Adarraga, Olatz and Bustero, Izaskun and Hayet, Miren and Caballero, Julen and Santamaria, Ibai},
  title = {Silver and copper screen‐printed temperature sensors on flexible substrates: The impact of ink sintering conditions and composition},
  journal = {Applied Research},
  year = {2024},
  volume = {3},
  number = {6},
  doi = {10.1002/appl.202300138}
}
Kostenlos starten →