EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printed PEDOT:PSS‐Based Lattice Pressure Sensors With Tunable Electromechanical Response

Ozan Karakaya, Naroa Lopez‐Larrea, Ali Veysel Tunc, Mikel Rincon‐Iglesias, Karin J. Chen, Katja Nau, Senentxu Lanceros‐Mendez, David Mecerreyes, Miryam Criado‐Gonzalez, Gerardo Hernandez‐Sosa

Advanced Materials Technologies · 2026-06 · 11 (12)

DOI: 10.1002/admt.202502107 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 14.03.2026. Verfasst von Ozan Karakaya und 9 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Ministerio de Ciencia y Tecnología, Eusko Jaurlaritza.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printed pressure sensors show broad potential, owing to their tunable mechanical and electrical properties. Meta‐structures are ideal candidates for such sensors, thanks to their lightweight nature and customizable mechanical behavior. In this study, we present 3D‐architected pressure sensors fabricated in a single step via digital light processing (DLP) 3D printing of a poly(3,4‐ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS)‐based photoresin. The electromechanical characteristics of an X‐Cell lattice are optimized by varying parameters such as relative density and lattice count to enhance manufacturability, sensitivity, and pressure range. The X‐cell lattice with 40% relative density and 64‐unit cells exhibits a sensitivity of 17.7 ± 5.8 kPa − 1 in the 0–15 kPa range, and 9.11 ± 4.19 kPa − 1 across a broader range of 15–120 kPa, demonstrating its suitability for both high‐sensitivity and wide‐range pressure sensing applications. Optimization is further extended to fabricate Gyroid and Schwarz D lattices showing initial sensitivities of 40.03 ± 0.64 and 7.4 ± 0.7 kPa − 1 , respectively. A proof‐of‐concept tactile sensor is developed by integrating multiple lattice designs into a single active layer. Requiring only two electrodes, this sensor leverages distinct electromechanical responses to localize pressure, eliminating complex arrays and enabling efficient development of next‐generation tactile sensors.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Ministerio de Ciencia y Tecnología
  • Eusko Jaurlaritza

Zitieren

APA

Karakaya, O., Lopez‐Larrea, N., Tunc, A. V., Rincon‐Iglesias, M., Chen, K. J., Nau, K., Lanceros‐Mendez, S., Mecerreyes, D., Criado‐Gonzalez, M., & Hernandez‐Sosa, G. (2026). 3D Printed PEDOT:PSS‐Based Lattice Pressure Sensors With Tunable Electromechanical Response. Advanced Materials Technologies, 11(12). https://doi.org/10.1002/admt.202502107

Vancouver

Karakaya O, Lopez‐Larrea N, Tunc AV, Rincon‐Iglesias M, Chen KJ, Nau K, et al. 3D Printed PEDOT:PSS‐Based Lattice Pressure Sensors With Tunable Electromechanical Response. Advanced Materials Technologies. 2026;11(12). doi:10.1002/admt.202502107

BibTeX
@article{Karakaya2026,
  author = {Karakaya, Ozan and Lopez‐Larrea, Naroa and Tunc, Ali Veysel and Rincon‐Iglesias, Mikel and Chen, Karin J. and Nau, Katja and Lanceros‐Mendez, Senentxu and Mecerreyes, David and Criado‐Gonzalez, Miryam and Hernandez‐Sosa, Gerardo},
  title = {3D Printed PEDOT:PSS‐Based Lattice Pressure Sensors With Tunable Electromechanical Response},
  journal = {Advanced Materials Technologies},
  year = {2026},
  volume = {11},
  number = {12},
  doi = {10.1002/admt.202502107}
}
Kostenlos starten →