EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Dual-Modal Hybrid Marker for Automatic Registration and Coordinate Hand-Over in C-Arm CT-Guided Spinal Navigation

Taeho Kim iD, Sungmin Kim iD

Sensors · 2026

DOI: 10.3390/s26206433 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2026. Verfasst von Taeho Kim und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical, Electronic, and Computer Engineering, University of Ulsan, Ulsan 44610, Republic of Korea. Hauptthemen laut MEDLINE: Tomography, X-Ray Computed, Spine, Surgery, Computer-Assisted. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Ministry of Trade, Industry & Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An asymmetric hybrid registration frame (RF) integrates radiopaque and optical markers to automate computed tomography (CT) registration and coordinate hand-over to a dynamic reference frame (DRF). We compared automatic and manual fiducial selection using three fixed CT datasets of a rigid sawbone phantom. Ten operators performed five manual registrations per CT, alongside one automatic benchmark per CT. Both methods used the same five registration fiducials, rigid registration procedure, and three evaluation centers excluded from transform estimation. Target registration error (TRE) was the root mean square distance between transformed design centers and CT-detected centers, without probe contact. Across equally weighted CT datasets, mean TRE was 0.538 mm for automatic and 1.565 mm for manual registration. The manual-minus-automatic difference was 1.027 mm (95% operator-bootstrap confidence interval, 0.951–1.148 mm). Mean registration processing times were 2.817 and 22.589 s, respectively. Under these common evaluation conditions, automatic fiducial detection reduced on-frame center discrepancy and registration time. These findings support the integrated registration and handover workflow as a basis for further validation at independent anatomical targets.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tomography, X-Ray ComputedSpineSurgery, Computer-AssistedHumansFiducial MarkersPhantoms, ImagingImage Processing, Computer-AssistedAlgorithms

Stichwörter der Autor:innen

C-arm CTautomatic registrationcoordinate handoverhybrid markerspinal navigationtarget registration errortarget-proximal re-registration

Autor:innen und Institutionen

  • Department of Electrical, Electronic, and Computer Engineering, University of Ulsan, Ulsan 44610, Republic of Korea.
  • School of Mechanical Engineering, University of Ulsan, Ulsan 44610, Republic of Korea.

ORCID-Profile: Taeho Kim, Sungmin Kim

Förderung

  • Ministry of Trade, Industry and Energy
  • Ministry of Trade, Industry & Energy

Zitieren

APA

Kim, T., & Kim, S. (2026). A Dual-Modal Hybrid Marker for Automatic Registration and Coordinate Hand-Over in C-Arm CT-Guided Spinal Navigation. Sensors. https://doi.org/10.3390/s26206433

Vancouver

Kim T, Kim S. A Dual-Modal Hybrid Marker for Automatic Registration and Coordinate Hand-Over in C-Arm CT-Guided Spinal Navigation. Sensors. 2026. doi:10.3390/s26206433

BibTeX
@article{Kim2026,
  author = {Kim, Taeho and Kim, Sungmin},
  title = {A Dual-Modal Hybrid Marker for Automatic Registration and Coordinate Hand-Over in C-Arm CT-Guided Spinal Navigation},
  journal = {Sensors},
  year = {2026},
  doi = {10.3390/s26206433}
}
Kostenlos starten →