EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Hybrid Optical Fiber Detector for the Simultaneous Measurement of Dust Concentration and Temperature

Chuanwei Zhai, Li Xiong iD

Sensors · 11.07.2025 · 25 (14) · 4333

DOI: 10.3390/s25144333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.07.2025. Verfasst von Chuanwei Zhai und 1 weiteren Autor:innen. Beteiligte Einrichtung: China Academy of Safety Science and Technology, Beijing 100012, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a hybrid optical fiber detector by combining the sensing mechanism of the fiber Bragg grating (FBG) and the light extinction method to enable the simultaneous measurement of dust concentration and temperature. Compared with the existing dust concentration sensors, the proposed detector offers three key advantages: intrinsic safety, dual-parameter measurement capability, and potentially network-based monitoring. The critical sensing components of the proposed detector consist of two optical collimators and an FBG. Using the extinction effect of light between the two collimators, the dust concentration and temperature are simultaneously determined by monitoring the intensity and the wavelength of the FBG reflectance spectrum, respectively. The measurement feasibility has been evaluated demonstrating that the two parameters of interest can be effectively sensed with minimally coupled outputs of ±3 pm and ±0.1 mW, respectively. Calibration experiments demonstrate that the change in the intensity of light from the FBG is exponentially related to the dust concentration variation with fitting coefficients equal to 0.948, 0.946, and 0.945 for 200 meshes, 300 meshes, and 400 meshes, respectively. The detector’s relative measurement errors were validated against the weighing method, confirming low measurement deviations.

Schlagwörter

Stichwörter der Autor:innen

dust concentration measurementfiber Bragg grating (FBG)optical fiber collimatoroptical fiber detectortemperature measurement

Autor:innen und Institutionen

  • China Academy of Safety Science and Technology, Beijing 100012, China.
  • Key Laboratory of Metallurgical Equipment and Control Technology, Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China.
  • Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering, Wuhan University of Science and Technology, Wuhan 430081, China.

ORCID-Profile: Li Xiong

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Zhai, C., & Xiong, L. (2025). A Hybrid Optical Fiber Detector for the Simultaneous Measurement of Dust Concentration and Temperature. Sensors, 25(14), 4333. https://doi.org/10.3390/s25144333

Vancouver

Zhai C, Xiong L. A Hybrid Optical Fiber Detector for the Simultaneous Measurement of Dust Concentration and Temperature. Sensors. 2025;25(14):4333. doi:10.3390/s25144333

BibTeX
@article{Zhai2025,
  author = {Zhai, Chuanwei and Xiong, Li},
  title = {A Hybrid Optical Fiber Detector for the Simultaneous Measurement of Dust Concentration and Temperature},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {14},
  pages = {4333},
  doi = {10.3390/s25144333}
}
Kostenlos starten →