EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

Fuling Yang iD, Kehui Zhu, Xiaoyi Yu, Tianze Liu, Ke Lu, Zelong Wang, Yan Li

Micromachines · 16.01.2024 · 15 (1) · 140

DOI: 10.3390/mi15010140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.01.2024. Verfasst von Fuling Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, China University of Mining and Technology, Beijing 100083, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities under Grant, China University of Mining and Technology (Beijing) College Student Innovation Training Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We propose an air gap fiber Bragg grating (g-FBG) sensor that can measure strain and temperature simultaneously. The sensor is made by aligning two fiber Bragg gratings (FBGs), and an air gap exists between these two sub-gratings. This sensor’s architecture allows it to form a spectrum with phase-shifted fiber Bragg grating (PSFBG) spectroscopy and Fabry–Perot interference (FPI) spectroscopy. Since the sensitivity of PSFBG and FPI spectra is different for strain and temperature, it is possible to measure both strain and temperature by measuring one of the reflected dips of PSFBG and the interference dip of FPI. The experimental results show that the strain sensitivity is about 11.95 pm/με via the dip wavelength detection of FPI, and the temperature sensitivity is about 9.64 pm/°C via the dip wavelength detection of PSFBG. The g-FBG sensor demonstrates a resolution of approximately ±3.7 με within the strain range of 0 to 1000 με and about ±0.6 °C within the temperature range of 25 °C to 120 °C. The proposed g-FBG sensor, characterized by its simple structure, compact size, and cost-effectiveness, exhibits significant potential in the field of multi-parameter measurements.

Schlagwörter

Stichwörter der Autor:innen

Fabry–Perot interferencefiber Bragg gratingoptical fiber sensorsstrain measurementtemperature measurement

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, China University of Mining and Technology, Beijing 100083, China.

ORCID-Profile: Fuling Yang

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities under Grant
  • China University of Mining and Technology (Beijing) College Student Innovation Training Program
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Yang, F., Zhu, K., Yu, X., Liu, T., Lu, K., Wang, Z., & Li, Y. (2024). Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement. Micromachines, 15(1), 140. https://doi.org/10.3390/mi15010140

Vancouver

Yang F, Zhu K, Yu X, Liu T, Lu K, Wang Z, et al. Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement. Micromachines. 2024;15(1):140. doi:10.3390/mi15010140

BibTeX
@article{Yang2024,
  author = {Yang, Fuling and Zhu, Kehui and Yu, Xiaoyi and Liu, Tianze and Lu, Ke and Wang, Zelong and Li, Yan},
  title = {Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {1},
  pages = {140},
  doi = {10.3390/mi15010140}
}
Kostenlos starten →