EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality

Manjae Shin iD, Seungbong Lee iD, Seungbin Baek, Sunghoon Lee, Sungmin Kim

Sensors · 2025

DOI: 10.3390/s25041276 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Manjae Shin und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Dongguk University Biomedical Campus, 32, Dongguk-ro, Ilsandong-gu, Goyang-si 10326, Republic of Korea. Hauptthemen laut MEDLINE: Dermatoglyphics, Water. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Food and Drug Safety, Ministry of Food and Drug Safety of South Korea in 2025, Ministry of Food and Drug Safety of South Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The frustrated total internal reflection (FTIR) optical fingerprint scanning method is widely used due to its cost-effectiveness. However, fingerprint image quality is highly dependent on fingertip surface conditions, with moisture generally considered a degrading factor. Interestingly, a prior study reported that excessive moisture may improve image quality, though their findings were based on qualitative observations, necessitating further quantitative analysis. Additionally, since the FTIR method relies on optical principles, image quality is also influenced by the wavelength of the light source. In this study, we conducted a preliminary clinical experiment to quantitatively analyze the impact of moisture levels on fingertips (wet, dry, and control) and light wavelengths (red, green, and blue) on FTIR fingerprint image quality. A total of 20 male and female participants with no physical impairments were involved. The results suggest that FTIR fingerprint image quality may improve under wet conditions and when illuminated with green and blue light sources compared to dry conditions and red light. Statistical evidence supports this consistent trend. However, given the limited sample size, the statistical validity and generalizability of these findings should be interpreted with caution. These insights provide a basis for optimizing fingerprint imaging conditions, potentially enhancing the reliability and accuracy of automatic fingerprint identification systems (AFIS) by reducing variations in individual fingerprint quality.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

DermatoglyphicsWaterHumansSpectroscopy, Fourier Transform InfraredFemaleMaleLightAdultFingersImage Processing, Computer-Assisted

Stichwörter der Autor:innen

biometricclinical studyfingerprintfrustrated total internal reflection (FTIR)statistical analysis

Substanzen

Water

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Dongguk University Biomedical Campus, 32, Dongguk-ro, Ilsandong-gu, Goyang-si 10326, Republic of Korea.
  • Department of Medical Device Business, Dongguk University, 30, Pildong-ro 1-gill, Jung-gu, Seoul 04620, Republic of Korea.

ORCID-Profile: Manjae Shin, Seungbong Lee

Förderung

  • Ministry of Food and Drug Safety
  • Ministry of Food and Drug Safety of South Korea in 2025
  • Ministry of Food and Drug Safety of South Korea

Zitieren

APA

Shin, M., Lee, S., Baek, S., Lee, S., & Kim, S. (2025). A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality. Sensors. https://doi.org/10.3390/s25041276

Vancouver

Shin M, Lee S, Baek S, Lee S, Kim S. A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality. Sensors. 2025. doi:10.3390/s25041276

BibTeX
@article{Shin2025,
  author = {Shin, Manjae and Lee, Seungbong and Baek, Seungbin and Lee, Sunghoon and Kim, Sungmin},
  title = {A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25041276}
}
Kostenlos starten →