A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality
Sensors · 2025
DOI: 10.3390/s25041276 ↗At a glance
Journal article in Sensors, 2025. Written by Manjae Shin and 4 co-authors. Institution: Department of Biomedical Engineering, Dongguk University Biomedical Campus, 32, Dongguk-ro, Ilsandong-gu, Goyang-si 10326, Republic of Korea. Major MEDLINE topics: Dermatoglyphics, Water. Cited 2 times so far (Crossref); 35 references. The full text is freely available (open access, CC BY 4.0). Funded by: Ministry of Food and Drug Safety, Ministry of Food and Drug Safety of South Korea in 2025, Ministry of Food and Drug Safety of South Korea.
Abstract (original language)
The frustrated total internal reflection (FTIR) optical fingerprint scanning method is widely used due to its cost-effectiveness. However, fingerprint image quality is highly dependent on fingertip surface conditions, with moisture generally considered a degrading factor. Interestingly, a prior study reported that excessive moisture may improve image quality, though their findings were based on qualitative observations, necessitating further quantitative analysis. Additionally, since the FTIR method relies on optical principles, image quality is also influenced by the wavelength of the light source. In this study, we conducted a preliminary clinical experiment to quantitatively analyze the impact of moisture levels on fingertips (wet, dry, and control) and light wavelengths (red, green, and blue) on FTIR fingerprint image quality. A total of 20 male and female participants with no physical impairments were involved. The results suggest that FTIR fingerprint image quality may improve under wet conditions and when illuminated with green and blue light sources compared to dry conditions and red light. Statistical evidence supports this consistent trend. However, given the limited sample size, the statistical validity and generalizability of these findings should be interpreted with caution. These insights provide a basis for optimizing fingerprint imaging conditions, potentially enhancing the reliability and accuracy of automatic fingerprint identification systems (AFIS) by reducing variations in individual fingerprint quality.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- Department of Biomedical Engineering, Dongguk University Biomedical Campus, 32, Dongguk-ro, Ilsandong-gu, Goyang-si 10326, Republic of Korea.
- Department of Medical Device Business, Dongguk University, 30, Pildong-ro 1-gill, Jung-gu, Seoul 04620, Republic of Korea.
ORCID profiles: Manjae Shin, Seungbong Lee
Funding
- Ministry of Food and Drug Safety
- Ministry of Food and Drug Safety of South Korea in 2025
- Ministry of Food and Drug Safety of South Korea
Cite
APA
Shin, M., Lee, S., Baek, S., Lee, S., & Kim, S. (2025). A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality. Sensors. https://doi.org/10.3390/s25041276
Vancouver
Shin M, Lee S, Baek S, Lee S, Kim S. A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality. Sensors. 2025. doi:10.3390/s25041276
BibTeX
@article{Shin2025,
author = {Shin, Manjae and Lee, Seungbong and Baek, Seungbin and Lee, Sunghoon and Kim, Sungmin},
title = {A Quantitative Analysis Study on the Effects of Moisture and Light Source on FTIR Fingerprint Image Quality},
journal = {Sensors},
year = {2025},
doi = {10.3390/s25041276}
}
EUVIMED