EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Batch Specular Plane Flatness Measurements Based on Phase Measuring Deflectometry

Zhuotong Li iD, Dongxue Wang, Lei Liu iD, Xiaodong Zhang

Sensors · 24.04.2024 · 24 (9) · 2693

DOI: 10.3390/s24092693 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 24.04.2024. Verfasst von Zhuotong Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Measuring Technology & Instruments, Laboratory of MicroNano Manufacturing Technology, Tianjin University, Tianjin 3…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Nature Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flatness is a critical parameter in the manufacturing industry, directly impacting the fit and overall product performance. As the efficiency of manufacturing continues to advance, there is an increasing demand for more accurate and efficient measurement techniques. Existing methods often struggle to strike a balance between precision and efficiency. In response, this article introduces a novel approach that is capable of achieving high-precision and rapid measurements concerning multiple surfaces. By enhancing the traditional phase measuring deflectometry (PMD) method, employing a matching technique based on polar lines and normal vector constraints to address discrete surface measurement challenges, and implementing a plane pre-positioning method to tackle low efficiency in binocular matching and solving, we successfully performed swift and synchronized measurements for a large batch of specular surfaces and obtained the three-dimensional surface profile of each measured surface. Through experimental validation, the method proposed in this paper can perform the batch measurement of specular planes while maintaining high measurement accuracy.

Schlagwörter

Stichwörter der Autor:innen

batch specular plane flatnessdiscrete surface measurementphase measuring deflectometryrapid reconstruction

Autor:innen und Institutionen

  • State Key Laboratory of Precision Measuring Technology & Instruments, Laboratory of MicroNano Manufacturing Technology, Tianjin University, Tianjin 300072, China.

ORCID-Profile: Zhuotong Li, Lei Liu

Förderung

  • National Nature Science Foundation of China

Zitieren

APA

Li, Z., Wang, D., Liu, L., & Zhang, X. (2024). Batch Specular Plane Flatness Measurements Based on Phase Measuring Deflectometry. Sensors, 24(9), 2693. https://doi.org/10.3390/s24092693

Vancouver

Li Z, Wang D, Liu L, Zhang X. Batch Specular Plane Flatness Measurements Based on Phase Measuring Deflectometry. Sensors. 2024;24(9):2693. doi:10.3390/s24092693

BibTeX
@article{Li2024,
  author = {Li, Zhuotong and Wang, Dongxue and Liu, Lei and Zhang, Xiaodong},
  title = {Batch Specular Plane Flatness Measurements Based on Phase Measuring Deflectometry},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {9},
  pages = {2693},
  doi = {10.3390/s24092693}
}
Kostenlos starten →