EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Robotic near optical coaxial phase measuring stitching deflectometry for form measurement of specular surfaces

Yanling Li, Feng Gao, Yongjia Xu, Wenrui Wu, Yang Yu, Nan Gao, Zhaozong Meng, Zonghua Zhang, Xin Zhang, Xiangqian Jiang

Optics Express · 25.08.2025 · 33 (17) · 36146

DOI: 10.1364/oe.558065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optics Express, online erschienen am 15.08.2025. Verfasst von Yanling Li und 9 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Engineering and Physical Sciences Research Council, Science Research Project of Hebei Education Department.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Form measurement of specular surfaces is critical for advanced manufacturing in various engineering fields. Near optical coaxial phase measuring deflectometry (NCPMD) has been proposed for in-situ form metrology with the advantages of good accuracy, small volume, lightweight, and minimal measurement errors caused by surface structure shadows. Accurate scanning of large freeform specular surfaces remains a challenge because there are no features on the surfaces that can be used for sub-surface stitching. In this paper, an accurate and automatic area scanning method is studied based on robotic near optical coaxial phase measuring stitching deflectometry (NCPMSD), which consists of an NCPMD system fixed on a robot arm. The NCPMSD scans the measured surface through robot arm control and reconstructs the form data of each sub-surface of the entire surface. Through the proposed robotic NCPMSD calibration method, the relationship between the NCPMD system and the robot arm is calibrated, and the coarse stitching is completed according to the coordinate transformation relationship and robot arm movement data. The stitching accuracy is then improved based on the gradient feature of the measured surfaces. The accuracy and effectiveness of the proposed method are verified through experiments by measuring a ring calibration mirror target and a freeform mirror. The method shows significant advancements in increasing the measurement field and flexibility of the in-situ metrology of the NCPMD system.

Förderung

  • National Natural Science Foundation of China
  • Engineering and Physical Sciences Research Council
  • Science Research Project of Hebei Education Department
  • Science and Technology Cooperation Special Project of Shijiazhuang

Zitieren

APA

Li, Y., Gao, F., Xu, Y., Wu, W., Yu, Y., Gao, N., Meng, Z., Zhang, Z., Zhang, X., & Jiang, X. (2025). Robotic near optical coaxial phase measuring stitching deflectometry for form measurement of specular surfaces. Optics Express, 33(17), 36146. https://doi.org/10.1364/oe.558065

Vancouver

Li Y, Gao F, Xu Y, Wu W, Yu Y, Gao N, et al. Robotic near optical coaxial phase measuring stitching deflectometry for form measurement of specular surfaces. Optics Express. 2025;33(17):36146. doi:10.1364/oe.558065

BibTeX
@article{Li2025,
  author = {Li, Yanling and Gao, Feng and Xu, Yongjia and Wu, Wenrui and Yu, Yang and Gao, Nan and Meng, Zhaozong and Zhang, Zonghua and Zhang, Xin and Jiang, Xiangqian},
  title = {Robotic near optical coaxial phase measuring stitching deflectometry for form measurement of specular surfaces},
  journal = {Optics Express},
  year = {2025},
  volume = {33},
  number = {17},
  pages = {36146},
  doi = {10.1364/oe.558065}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche