Electrochemical Detection of Bisphenol A Based on Gold Nanoparticles/Multi-Walled Carbon Nanotubes: Applications on Glassy Carbon and Screen Printed Electrodes
Sensors · 17.04.2024 · 24 (8) · 2570
DOI: 10.3390/s24082570 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 17.04.2024. Verfasst von Maximina Luis-Sunga und 4 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Sensors, Biosensors and Advanced Materials, Faculty of Health Sciences, Universidad de la Laguna, Campus de Ofra s/n, 38071 La Laguna, …. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MAC 2014-2020 program, Agencia Canaria de Investigación, Innovación y Sociedad de la Información, European Social Fund.
Abstract (Originalsprache)
Bisphenol A (BPA) has been classified as an endocrine-disrupting substance that may cause adverse effects on human health and the environment. The development of simple and sensitive electrochemical biosensors is crucial for the rapid and effective quantitative determination of BPA. This work presents a study on electrochemical sensors utilizing gold nanoparticle-modified multi-walled carbon nanotubes (CNT/AuNPs). Glassy carbon electrodes (GCEs) and screen-printed electrodes (SPEs) were conveniently modified and used for BPA detection. AuNPs were electrodeposited onto the CNT-modified electrodes using the galvanostatic method. The electrodes were properly modified and characterized by using Raman spectroscopy, cyclic voltammetry (CV), and electrochemical impedance analysis (EIS). The electrochemical response of the sensors was studied using differential pulse voltammetry (DPV) and constant potential amperometry (CPA) for modified GCE and SPE electrodes, respectively, and the main analytical parameters were studied and optimized. Problems encountered with the use of GCEs, such as sensor degradation and high limit of detection (LOD), were overcome by using modified SPEs and a flow injection device for the measurements. Under this approach, an LOD as low as 5 nM (S/N = 3) was achieved and presented a linear range up to 20 μM. Finally, our investigation addressed interference, reproducibility, and reusability aspects, successfully identifying BPA in both spiked and authentic samples, including commercial and tap waters. These findings underscore the practical applicability of our method for accurate BPA detection in real-world scenarios. Notably, the integration of SPEs and a flow injection device facilitated simplified automation, offering an exceptionally efficient and reliable solution for precise BPA detection in water analysis laboratories.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Sensors, Biosensors and Advanced Materials, Faculty of Health Sciences, Universidad de la Laguna, Campus de Ofra s/n, 38071 La Laguna, Spain.
- Departamento de Química, Instituto Universitario de Materiales y Nanotecnología, Universidad de la Laguna, P.O. Box 456, 38200 La Laguna, Spain.
- Departamento de Ciencias Médicas Básicas and Instituto de Tecnologías Biomédicas, Universidad de La Laguna, 38200 La Laguna, Spain.
- Instituto Universitario de Neurociencia, Universidad de la Laguna, 38071 Santa Cruz de Tenerife, Spain.
ORCID-Profile: Maximina Luis-Sunga, Soledad Carinelli, Gonzalo García, José Luis González-Mora, Pedro A Salazar-Carballo
Förderung
- MAC 2014-2020 program
- Agencia Canaria de Investigación, Innovación y Sociedad de la Información
- European Social Fund
- Ministerio de Ciencia e Innovación
- Interreg MAC 2014–2020 program
- Agencia Canaria de Investigación, Innovación y Sociedad de la Información de la Consejería de Economía, Conocimiento y Empleo
- Juan de la Cierva Programme
Zitieren
APA
Luis-Sunga, M., Carinelli, S., García, G., González-Mora, J. L., & Salazar-Carballo, P. A. (2024). Electrochemical Detection of Bisphenol A Based on Gold Nanoparticles/Multi-Walled Carbon Nanotubes: Applications on Glassy Carbon and Screen Printed Electrodes. Sensors, 24(8), 2570. https://doi.org/10.3390/s24082570
Vancouver
Luis-Sunga M, Carinelli S, García G, González-Mora JL, Salazar-Carballo PA. Electrochemical Detection of Bisphenol A Based on Gold Nanoparticles/Multi-Walled Carbon Nanotubes: Applications on Glassy Carbon and Screen Printed Electrodes. Sensors. 2024;24(8):2570. doi:10.3390/s24082570
BibTeX
@article{LuisSunga2024,
author = {Luis-Sunga, Maximina and Carinelli, Soledad and García, Gonzalo and González-Mora, José Luis and Salazar-Carballo, Pedro A},
title = {Electrochemical Detection of Bisphenol A Based on Gold Nanoparticles/Multi-Walled Carbon Nanotubes: Applications on Glassy Carbon and Screen Printed Electrodes},
journal = {Sensors},
year = {2024},
volume = {24},
number = {8},
pages = {2570},
doi = {10.3390/s24082570}
}
EUVIMED