Towards Embedded Electrochemical Sensors for On-Site Nitrite Detection by Gold Nanoparticles Modified Screen Printed Carbon Electrodes
Sensors · 09.03.2023 · 23 (6) · 2961
DOI: 10.3390/s23062961 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 09.03.2023. Verfasst von Anurag Adiraju und 9 weiteren Autor:innen. Beteiligte Einrichtung: Chair Measurement and Sensor Technology, Department of Electrical Engineering and Information Technology, Chemnitz University of Technology, 09107 Ch…. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Sächsische Aufbaubank.
Abstract (Originalsprache)
The transition of electrochemical sensors from lab-based measurements to real-time analysis requires special attention to different aspects in addition to the classical development of new sensing materials. Several critical challenges need to be addressed including a reproducible fabrication procedure, stability, lifetime, and development of cost-effective sensor electronics. In this paper, we address these aspects exemplarily for a nitrite sensor. An electrochemical sensor has been developed using one-step electrodeposited (Ed) gold nanoparticles (EdAu) for the detection of nitrite in water, which shows a low limit of detection of 0.38 µM and excellent analytical capabilities in groundwater. Experimental investigations with 10 realized sensors show a very high reproducibility enabling mass production. A comprehensive investigation of the sensor drift by calendar and cyclic aging was carried out for 160 cycles to assess the stability of the electrodes. Electrochemical impedance spectroscopy (EIS) shows significant changes with increasing aging inferring the deterioration of the electrode surface. To enable on-site measurements outside the laboratory, a compact and cost-effective wireless potentiostat combining cyclic and square wave voltammetry, and EIS capabilities has been designed and validated. The implemented methodology in this study builds a basis for the development of further on-site distributed electrochemical sensor networks.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chair Measurement and Sensor Technology, Department of Electrical Engineering and Information Technology, Chemnitz University of Technology, 09107 Chemnitz, Germany.
- Analysis of Solid Surfaces, Institute for Physics, Chemnitz University of Technology, 09107 Chemnitz, Germany.
ORCID-Profile: Ammar Al-Hamry, Amina Brahem, Olfa Kanoun
Förderung
- Deutsche Forschungsgemeinschaft
- Sächsische Aufbaubank
Zitieren
APA
Adiraju, A., Munjal, R., Viehweger, C., Al-Hamry, A., Brahem, A., Hussain, J., Kommisetty, S., Jalasutram, A., Tegenkamp, C., & Kanoun, O. (2023). Towards Embedded Electrochemical Sensors for On-Site Nitrite Detection by Gold Nanoparticles Modified Screen Printed Carbon Electrodes. Sensors, 23(6), 2961. https://doi.org/10.3390/s23062961
Vancouver
Adiraju A, Munjal R, Viehweger C, Al-Hamry A, Brahem A, Hussain J, et al. Towards Embedded Electrochemical Sensors for On-Site Nitrite Detection by Gold Nanoparticles Modified Screen Printed Carbon Electrodes. Sensors. 2023;23(6):2961. doi:10.3390/s23062961
BibTeX
@article{Adiraju2023,
author = {Adiraju, Anurag and Munjal, Rohan and Viehweger, Christian and Al-Hamry, Ammar and Brahem, Amina and Hussain, Jawaid and Kommisetty, Sanhith and Jalasutram, Aditya and Tegenkamp, Christoph and Kanoun, Olfa},
title = {Towards Embedded Electrochemical Sensors for On-Site Nitrite Detection by Gold Nanoparticles Modified Screen Printed Carbon Electrodes},
journal = {Sensors},
year = {2023},
volume = {23},
number = {6},
pages = {2961},
doi = {10.3390/s23062961}
}
EUVIMED