EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantification of Statins in Pharmaceutical Products Using Screen-Printed Sensors Based of Multi-Walled Carbon Nanotubes and Gold Nanoparticles

Ramona Oana Roșca, Alexandra Virginia Bounegru, Constantin Apetrei

Inventions · 30.08.2023 · 8 (5) · 111

DOI: 10.3390/inventions8050111 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Inventions, online erschienen am 30.08.2023. Verfasst von Ramona Oana Roșca und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study describes the use of electrochemical sensors to detect and quantify several statins (rosuvastatin and simvastatin) in pharmaceutical products. Two types of commercially screen-printed sensors were used and compared: one based on carbon (SPCE) and the other modified with gold nanoparticles and multi-walled carbon nanotubes (SPE/GNP-MWCNT). Cyclic voltammetry was employed for determination. The AuNP-MWCNTs/SPCE sensor outperformed the SPCE sensor, displaying excellent electrochemical properties. It demonstrated high sensitivity with low limits of detection (LOD) and quantification (LOQ) values: 0.15 µM and 5.03 µM, respectively, for rosuvastatin and 0.30 µM and 1.01 µM, respectively, for simvastatin. The sensor had a wide linear range of 20–275 µM for rosuvastatin and 50–350 µM for simvastatin. Using the AuNP-MWCNTs/SPCE sensor, rosuvastatin and simvastatin were successfully quantified in pharmaceutical products. The results were validated towards producer-reported values (standardized drugs) and a conventional analysis method (FTIR). The sensor exhibited excellent stability, reproducibility, and analytical recovery ranging from 99.3% to 106.6% with a low relative standard deviation (RSD) of less than 1%. In conclusion, the AuNP-MWCNTs/SPCE sensor proved to be a reliable and sensitive tool for detecting and quantifying statins in pharmaceutical products. Its superior electrochemical properties, low LOD and LOQ values, wide linear range, and high analytical recovery make it a promising choice for pharmaceutical quality control.

Zitieren

APA

Roșca, R. O., Bounegru, A. V., & Apetrei, C. (2023). Quantification of Statins in Pharmaceutical Products Using Screen-Printed Sensors Based of Multi-Walled Carbon Nanotubes and Gold Nanoparticles. Inventions, 8(5), 111. https://doi.org/10.3390/inventions8050111

Vancouver

Roșca RO, Bounegru AV, Apetrei C. Quantification of Statins in Pharmaceutical Products Using Screen-Printed Sensors Based of Multi-Walled Carbon Nanotubes and Gold Nanoparticles. Inventions. 2023;8(5):111. doi:10.3390/inventions8050111

BibTeX
@article{Roca2023,
  author = {Roșca, Ramona Oana and Bounegru, Alexandra Virginia and Apetrei, Constantin},
  title = {Quantification of Statins in Pharmaceutical Products Using Screen-Printed Sensors Based of Multi-Walled Carbon Nanotubes and Gold Nanoparticles},
  journal = {Inventions},
  year = {2023},
  volume = {8},
  number = {5},
  pages = {111},
  doi = {10.3390/inventions8050111}
}
Kostenlos starten →