EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modelling Polarization Effects in a CdZnTe Sensor at Low Bias

Jindřich Pipek iD, Roman Grill iD, Marián Betušiak iD, Kris Iniewski

Sensors · 2023

DOI: 10.3390/s23125681 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Jindřich Pipek und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Physics, Faculty of Mathematics and Physics, Charles University, Ke Karlovu 5, CZ-121 16 Prague, Czech Republic. Hauptthemen laut MEDLINE: Spectrum Analysis. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Semi-insulating CdTe and CdZnTe crystals fabricated into pixelated sensors and integrated into radiation detection modules have demonstrated a remarkable ability to operate under rapidly changing X-ray irradiation environments. Such challenging conditions are required by all photon-counting-based applications, including medical computed tomography (CT), airport scanners, and non-destructive testing (NDT). Although, maximum flux rates and operating conditions differ in each case. In this paper, we investigated the possibility of using the detector under high-flux X-ray irradiation with a low electric field satisfactory for maintaining good counting operation. We numerically simulated electric field profiles visualized via Pockels effect measurement in a detector affected by high-flux polarization. Solving coupled drift–diffusion and Poisson’s equations, we defined the defect model, consistently depicting polarization. Subsequently, we simulated the charge transport and evaluated the collected charge, including the construction of an X-ray spectrum on a commercial 2-mm-thick pixelated CdZnTe detector with 330 µm pixel pitch used in spectral CT applications. We analyzed the effect of allied electronics on the quality of the spectrum and suggested setup optimization to improve the shape of the spectrum.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Spectrum AnalysisX-RaysCadmiumTelluriumZinc

Stichwörter der Autor:innen

CdZnTehigh fluxpolarizationradiation detector

Substanzen

CdZnTeCadmiumTelluriumZinc

Autor:innen und Institutionen

  • Institute of Physics, Faculty of Mathematics and Physics, Charles University, Ke Karlovu 5, CZ-121 16 Prague, Czech Republic.
  • Redlen Technologies Inc., 1763 Sean Heights, Saanichton, BC V8M 0A5, Canada.

ORCID-Profile: Jindřich Pipek, Roman Grill, Marián Betušiak

Förderung

  • Czech Science Foundation

Zitieren

APA

Pipek, J., Grill, R., Betušiak, M., & Iniewski, K. (2023). Modelling Polarization Effects in a CdZnTe Sensor at Low Bias. Sensors. https://doi.org/10.3390/s23125681

Vancouver

Pipek J, Grill R, Betušiak M, Iniewski K. Modelling Polarization Effects in a CdZnTe Sensor at Low Bias. Sensors. 2023. doi:10.3390/s23125681

BibTeX
@article{Pipek2023,
  author = {Pipek, Jindřich and Grill, Roman and Betušiak, Marián and Iniewski, Kris},
  title = {Modelling Polarization Effects in a CdZnTe Sensor at Low Bias},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23125681}
}
Kostenlos starten →