Multiphysics Modeling of Electrochemical Impedance Spectroscopy Responses of SAM-Modified Screen-Printed Electrodes
Sensors · 28.01.2024 · 24 (3) · 858
DOI: 10.3390/s24030858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 28.01.2024. Verfasst von Lara Franchin und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Information Engineering, University of Padova, 35131 Padova, Italy. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this work, we present a multiphysics modeling approach capable of simulating electrochemical impedance spectroscopy (EIS) responses of screen-printed electrodes (SPEs) modified with self-assembled monolayers of 11-Mercaptoundecanoic acid (MUA). Commercially available gold SPEs are electrochemically characterized through experimental cyclic voltammetry and EIS measurements with 10 mM [Fe(CN)6]3−/4− redox couple in phosphate buffered saline before and after the surface immobilization of MUA at different concentrations. We design the multiphysics model through COMSOL Multiphysics® based on the 3D geometry of the devices under test. The model includes four different physics considering the metal/solution interface electrochemical phenomena, the ion and electron potentials and currents, and the measurement set-up. The model is calibrated through a set of experimental measurements, allowing the tuning of the parameters used by the model. We use the calibrated model to simulate the EIS response of MUA-modified SPEs, comparing the results with experimental data. The simulations fit the experimental curves well, following the variation of MUA concentration on the surface from 1 µM to 100 µM. The EIS parameters, retrieved through a CPE-modified Randles’ circuit, confirm the consistency with the experimental data. Notably, the simulated surface coverage estimates and the variation of charge transfer resistance due to MUA-immobilization are well matched with their experimental counterparts, reporting only a 2% difference and being consistent with the experimental electrochemical behavior of the SPEs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Information Engineering, University of Padova, 35131 Padova, Italy.
ORCID-Profile: Lara Franchin, Stefano Bonaldo
Zitieren
APA
Franchin, L., & Bonaldo, S. (2024). Multiphysics Modeling of Electrochemical Impedance Spectroscopy Responses of SAM-Modified Screen-Printed Electrodes. Sensors, 24(3), 858. https://doi.org/10.3390/s24030858
Vancouver
Franchin L, Bonaldo S. Multiphysics Modeling of Electrochemical Impedance Spectroscopy Responses of SAM-Modified Screen-Printed Electrodes. Sensors. 2024;24(3):858. doi:10.3390/s24030858
BibTeX
@article{Franchin2024,
author = {Franchin, Lara and Bonaldo, Stefano},
title = {Multiphysics Modeling of Electrochemical Impedance Spectroscopy Responses of SAM-Modified Screen-Printed Electrodes},
journal = {Sensors},
year = {2024},
volume = {24},
number = {3},
pages = {858},
doi = {10.3390/s24030858}
}
EUVIMED