EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Towards Enhanced Eddy Current Testing Array Probes Scalability for Powder Bed Fusion Layer-Wise Imaging

André Barrancos, Rodolfo L Batalha iD, Luís S Rosado iD

Sensors · 01.03.2023 · 23 (5) · 2711

DOI: 10.3390/s23052711 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.03.2023. Verfasst von André Barrancos und 2 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Telecomunicações, Av. Rovisco Pais 1, 1049-001 Lisbon, Portugal. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science Technology and Higher Education, Fundação para a Ciência e Tecnologia, FCT/MCTES through national funds.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a new eddy current testing array probe and readout electronics that target the layer-wise quality control in powder bed fusion metal additive manufacturing. The proposed design approach brings important benefits to the sensors’ number scalability, exploring alternative sensor elements and minimalist signal generation and demodulation. Small-sized, commercially available surface-mounted technology coils were evaluated as an alternative to usually employed magneto-resistive sensors, demonstrating low cost, design flexibility, and easy integration with the readout electronics. Strategies to minimize the readout electronics were proposed, considering the specific characteristics of the sensors’ signals. An adjustable single phase coherent demodulation scheme is proposed as an alternative to traditional in-phase and quadrature demodulation provided that the signals under measurement showed minimal phase variations. A simplified amplification and demodulation frontend using discrete components was employed together with offset removal, vector amplification, and digitalization implemented within the microcontrollers’ advanced mixed signal peripherals. An array probe with 16 sensor coils and a 5 mm pitch was materialized together with non-multiplexed digital readout electronics, allowing for a sensor frequency of up to 1.5 MHz and digitalization with 12 bits resolution, as well as a 10 kHz sampling rate.

Schlagwörter

Stichwörter der Autor:innen

eddy current testingmetal additive manufacturingquality controlsensors arraysingle phase coherent demodulationsurface-mounted coils

Autor:innen und Institutionen

  • Instituto de Telecomunicações, Av. Rovisco Pais 1, 1049-001 Lisbon, Portugal.
  • Instituto de Soldadura e Qualidade, Avenida Professor Dr. Cavaco Silva, 33 Taguspark, 2740-120 Porto Salvo, Portugal.
  • Instituto Superior Técnico, University of Lisbon, Av. Rovisco Pais 1, 1049-001 Lisbon, Portugal.

ORCID-Profile: Rodolfo L Batalha, Luís S Rosado

Förderung

  • Ministry of Science Technology and Higher Education
  • Fundação para a Ciência e Tecnologia
  • FCT/MCTES through national funds
  • EU funds

Zitieren

APA

Barrancos, A., Batalha, R. L., & Rosado, L. S. (2023). Towards Enhanced Eddy Current Testing Array Probes Scalability for Powder Bed Fusion Layer-Wise Imaging. Sensors, 23(5), 2711. https://doi.org/10.3390/s23052711

Vancouver

Barrancos A, Batalha RL, Rosado LS. Towards Enhanced Eddy Current Testing Array Probes Scalability for Powder Bed Fusion Layer-Wise Imaging. Sensors. 2023;23(5):2711. doi:10.3390/s23052711

BibTeX
@article{Barrancos2023,
  author = {Barrancos, André and Batalha, Rodolfo L and Rosado, Luís S},
  title = {Towards Enhanced Eddy Current Testing Array Probes Scalability for Powder Bed Fusion Layer-Wise Imaging},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {5},
  pages = {2711},
  doi = {10.3390/s23052711}
}
Kostenlos starten →