EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Online Quality Control of Powder Bed Fusion with High-Resolution Eddy Current Testing Inductive Sensor Arrays

Pedro Faria iD, Rodolfo L Batalha iD, André Barrancos iD, Luís S Rosado iD

Sensors · 24.10.2024 · 24 (21) · 6827

DOI: 10.3390/s24216827 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 24.10.2024. Verfasst von Pedro Faria und 3 weiteren Autor:innen. Beteiligte Einrichtung: Strata Tech Labs, Rua da Bela Vista à Graça 27, 819, 1170-054 Lisbon, Portugal. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, Instituto de Soldadura e Qualidade, FCT/MCTES.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the development of a novel eddy current array (ECA) system for real-time, layer-by-layer quality control in powder bed fusion (PBF) additive manufacturing. The system is integrated into the recoater of a PBF machine to provide spatially resolved electrical conductivity imaging of the manufactured part. The system features an array of 40 inductive sensors spaced at 1 mm pitch and is capable of performing a full array readout every 0.192 mm at 100 mm/s recoater speed. Array scalability was achieved through the careful selection of the electromagnetic configuration, miniaturized and seamlessly integrated sensor elements, and the use of advanced mixed signal processing techniques. Experimental validation was performed on stainless steel 316L parts, successfully detecting metallic structures and confirming system performance in both laboratory and real-time PBF environments. The prototype achieved a signal-to-noise ratio (SNR) of 26.5 dB, discriminating metal from air and thus demonstrating its potential for improving PBF part design, process optimization, and defect detection.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingeddy current testinginductive sensor arrayspowder bed fusion

Autor:innen und Institutionen

  • Strata Tech Labs, Rua da Bela Vista à Graça 27, 819, 1170-054 Lisbon, Portugal.
  • Instituto de Soldadura e Qualidade, Avenida Professor Dr. Cavaco Silva 33, Taguspark, 2740-120 Porto Salvo, Portugal.
  • Instituto Superior Técnico, University of Lisbon, Av. Rovisco Pais 1, 1049-001 Lisbon, Portugal.
  • Instituto de Telecomunicações, Av. Rovisco Pais 1, 1049-001 Lisbon, Portugal.

ORCID-Profile: Pedro Faria, Rodolfo L Batalha, André Barrancos, Luís S Rosado

Förderung

  • Fundação para a Ciência e Tecnologia
  • Instituto de Soldadura e Qualidade
  • FCT/MCTES
  • EU funds
  • Center for Technology and Innovation—ISQ

Zitieren

APA

Faria, P., Batalha, R. L., Barrancos, A., & Rosado, L. S. (2024). Online Quality Control of Powder Bed Fusion with High-Resolution Eddy Current Testing Inductive Sensor Arrays. Sensors, 24(21), 6827. https://doi.org/10.3390/s24216827

Vancouver

Faria P, Batalha RL, Barrancos A, Rosado LS. Online Quality Control of Powder Bed Fusion with High-Resolution Eddy Current Testing Inductive Sensor Arrays. Sensors. 2024;24(21):6827. doi:10.3390/s24216827

BibTeX
@article{Faria2024,
  author = {Faria, Pedro and Batalha, Rodolfo L and Barrancos, André and Rosado, Luís S},
  title = {Online Quality Control of Powder Bed Fusion with High-Resolution Eddy Current Testing Inductive Sensor Arrays},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {21},
  pages = {6827},
  doi = {10.3390/s24216827}
}
Kostenlos starten →