EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Learning-Enabled Layer-Wise Melting Quality Recognition for Laser Powder Bed Fusion Process via In Situ Monitoring

Yuan Liu, Bowei Zou, Zhizhou Zhang, Yongxing Zhang iD, Shiqing Huang iD

Materials · 09.06.2026 · 19 (12) · 2463

DOI: 10.3390/ma19122463 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.06.2026. Verfasst von Yuan Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanics and Construction Engineering, Jinan University, Guangzhou 510632, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EPSRC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (L-PBF) has emerged as a core metal additive manufacturing technology for high-end sectors, including aerospace and medical device manufacturing. However, melting anomalies that occur during fabrication accumulate layer by layer, leading to degraded surface quality and impaired mechanical performance of as-built components—a critical bottleneck limiting their large-scale industrial adoption. Accurate and robust layer-wise melting quality recognition remains a challenge due to the complex surface morphologies induced by such melting anomalies. This study presents a machine learning-enabled in situ monitoring approach for layer-wise melting quality identification in L-PBF. By systematically varying laser power and scanning speed, 24 parameter combinations were designed to fabricate specimens with three distinct melting states: over-melting (OM), lack of fusion (LOF), and normal melting. A high-resolution complementary meta–oxide–semiconductor (CMOS) camera was used to capture layer-wise surface images of the specimens, and following abnormal layer filtering and manual validation, a high-quality dataset comprising 5110 layer-wise images was constructed. Two mainstream machine learning approaches were systematically evaluated and optimized for melting quality classification: a support vector machine (SVM) model leveraging handcrafted gray-level co-occurrence matrix (GLCM) texture features achieved a classification accuracy of 96.77%, while a convolutional neural network (CNN) model with end-to-end feature learning directly from raw images attained a superior accuracy of 98.14%. In terms of computational efficiency, the CNN model exhibited a faster inference speed with a per-layer inference time of just 0.036 s, nearly half that of the SVM model (0.068 s per layer). Most critically, the CNN model completely eliminated fatal cross-class misclassification between OM and LOF—an error mode common in the SVM model that would trigger erroneous process corrective actions in practical industrial applications. The findings demonstrate that image-based machine learning provides a reliable technical foundation for intelligent in situ monitoring of the L-PBF process. With its high accuracy, strong robustness, and superior computational efficiency, the CNN model can effectively support on-site operational decision-making, reduce material and time losses, and enhance process stability in industrial settings, thus exhibiting significant potential for practical engineering deployment.

Schlagwörter

Stichwörter der Autor:innen

defects classificationin situ monitoringlaser powder bed fusionmachine learningmelting quality recognition

Autor:innen und Institutionen

  • School of Mechanics and Construction Engineering, Jinan University, Guangzhou 510632, China.
  • Electric Power Dispatching and Control Center of Guangdong Power Grid Co., Ltd., Guangzhou 510600, China.
  • Laser Processing Research Laboratory, School of Engineering, The University of Manchester, Manchester M13 9PL, UK.
  • School of Electromechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510665, China.
  • College of Packaging Engineering, Jinan University, Zhuhai 519070, China.

ORCID-Profile: Yongxing Zhang, Shiqing Huang

Förderung

  • EPSRC

Zitieren

APA

Liu, Y., Zou, B., Zhang, Z., Zhang, Y., & Huang, S. (2026). Machine Learning-Enabled Layer-Wise Melting Quality Recognition for Laser Powder Bed Fusion Process via In Situ Monitoring. Materials, 19(12), 2463. https://doi.org/10.3390/ma19122463

Vancouver

Liu Y, Zou B, Zhang Z, Zhang Y, Huang S. Machine Learning-Enabled Layer-Wise Melting Quality Recognition for Laser Powder Bed Fusion Process via In Situ Monitoring. Materials. 2026;19(12):2463. doi:10.3390/ma19122463

BibTeX
@article{Liu2026,
  author = {Liu, Yuan and Zou, Bowei and Zhang, Zhizhou and Zhang, Yongxing and Huang, Shiqing},
  title = {Machine Learning-Enabled Layer-Wise Melting Quality Recognition for Laser Powder Bed Fusion Process via In Situ Monitoring},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2463},
  doi = {10.3390/ma19122463}
}
Kostenlos starten →