EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Estimated Temperature of the Semiconductor Diode Junction on the Basis of the Remote Thermographic Measurement

Arkadiusz Hulewicz iD, Krzysztof Dziarski iD, Zbigniew Krawiecki iD

Sensors · 09.02.2023 · 23 (4) · 1944

DOI: 10.3390/s23041944 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.02.2023. Verfasst von Arkadiusz Hulewicz und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Electrical Engineering and Electronics, Poznan University of Technology, Piotrowo 3A, 60-965 Poznan, Poland. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Poznań University of Technology, Ministry of Education and Science of Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The value of a semiconductor’s diode temperature determines the correct operation of this element and its useful lifetime. One of the methods for determining the die temperature of a semiconductor diode is through the use of indirect thermographic measurements. The accuracy of the thermographic temperature measurement of the diode case depends on the prevailing conditions. The temperature of the mold body (the black part of the diode case made of epoxy resin) depends on the place of measurement. The temperature of the place above the die is closer to the die temperature than the temperature of mold body fragments above the base plate. In addition, the difficulty of its thermographic temperature measurement increases when the surface whose temperature is being measured is in motion. Then, the temperature measured by thermography may not apply to the warmest point in the case where the die temperature is determined. Information about the difference between temperatures of the different parts of the mold body and the die may be important. For this reason, it was decided to check how much the temperature measurement error of the die diode changes if the temperature of the diode case is not measured at the point that is above the die.

Schlagwörter

Stichwörter der Autor:innen

LabVIEWSolidWorksdiodesemiconductor diesilicon carbidethermography

Autor:innen und Institutionen

  • Institute of Electrical Engineering and Electronics, Poznan University of Technology, Piotrowo 3A, 60-965 Poznan, Poland.
  • Institute of Electric Power Engineering, Poznan University of Technology, Piotrowo 3A, 60-965 Poznan, Poland.

ORCID-Profile: Arkadiusz Hulewicz, Krzysztof Dziarski, Zbigniew Krawiecki

Förderung

  • Poznań University of Technology
  • Ministry of Education and Science of Poland

Zitieren

APA

Hulewicz, A., Dziarski, K., & Krawiecki, Z. (2023). The Estimated Temperature of the Semiconductor Diode Junction on the Basis of the Remote Thermographic Measurement. Sensors, 23(4), 1944. https://doi.org/10.3390/s23041944

Vancouver

Hulewicz A, Dziarski K, Krawiecki Z. The Estimated Temperature of the Semiconductor Diode Junction on the Basis of the Remote Thermographic Measurement. Sensors. 2023;23(4):1944. doi:10.3390/s23041944

BibTeX
@article{Hulewicz2023,
  author = {Hulewicz, Arkadiusz and Dziarski, Krzysztof and Krawiecki, Zbigniew},
  title = {The Estimated Temperature of the Semiconductor Diode Junction on the Basis of the Remote Thermographic Measurement},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {4},
  pages = {1944},
  doi = {10.3390/s23041944}
}
Kostenlos starten →