EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Digital Image Correlation Analysis of Implant Angulation, Splinting, and Length on Peri-Implant Strain: An In Vitro Study

Muralidharan Priyanka, Baltha Shreya, V. Manju, M. P. Hariprasad, Prathap Ananth

Prosthesis · 01.03.2026 · 8 (3) · 24

DOI: 10.3390/prosthesis8030024 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Prosthesis, online erschienen am 01.03.2026. Verfasst von Muralidharan Priyanka und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: Dental implants are an established modality for oral rehabilitation, but their biomechanical success depends on controlling peri-implant strain, which is influenced by implant angulation, splinting, and length. This in vitro study evaluated the effects of these variables on strain and displacement under axial and oblique loading using digital image correlation (DIC).

Methods

Three CBCT-derived mandibular models were 3D-printed and restored with screw-retained full-metal crowns. Group 1 compared parallel vs. angulated implants; Group 2 assessed splinted vs. non-splinted restorations; and Group 3 compared short (4.2 × 6.25 mm) vs. long (4.2 × 13 mm) implants. All specimens were loaded to 500 N at 0°, 15°, and 30° using a universal testing machine. Strain and displacement were analyzed with Istra 4D software and statistically evaluated using ANOVA and independent t-tests (α = 0.05).

Results

Parallel implants exhibited progressively higher strain with load angle, peaking at 30° (p < 0.01), while angulated implants recorded their highest strain at 0° (p = 0.008), indicating better adaptation to oblique forces. Splinted restorations significantly reduced strain at 0° and 30° (p = 0.023) and lowered displacement across all inclinations (p = 0.0001). Short implants consistently produced greater strain and displacement than long implants (p < 0.02).

Conclusions

Angulated implants mitigated strain under off-axis loading compared to parallel configurations. Splinting decreased strain and displacement, while longer implants consistently improved biomechanical performance. Optimal selection of implant orientation, splinting, and length may minimize peri-implant strain under functional loads. Findings are limited to in vitro conditions with static loading and a single implant system.

Zitieren

APA

Priyanka, M., Shreya, B., Manju, V., Hariprasad, M. P., & Ananth, P. (2026). Digital Image Correlation Analysis of Implant Angulation, Splinting, and Length on Peri-Implant Strain: An In Vitro Study. Prosthesis, 8(3), 24. https://doi.org/10.3390/prosthesis8030024

Vancouver

Priyanka M, Shreya B, Manju V, Hariprasad MP, Ananth P. Digital Image Correlation Analysis of Implant Angulation, Splinting, and Length on Peri-Implant Strain: An In Vitro Study. Prosthesis. 2026;8(3):24. doi:10.3390/prosthesis8030024

BibTeX
@article{Priyanka2026,
  author = {Priyanka, Muralidharan and Shreya, Baltha and Manju, V. and Hariprasad, M. P. and Ananth, Prathap},
  title = {Digital Image Correlation Analysis of Implant Angulation, Splinting, and Length on Peri-Implant Strain: An In Vitro Study},
  journal = {Prosthesis},
  year = {2026},
  volume = {8},
  number = {3},
  pages = {24},
  doi = {10.3390/prosthesis8030024}
}
Kostenlos starten →