EUVIMEDEUVIMED entdecken
StudienprotokollOpen Access · CC BY 4.0

Finite Element Analysis of Peri-Implant Stress in Maxillary All-on-Four Rehabilitation: Effects of Posterior Implant Angulation and Loading Protocol

Juan Alberto Aristizábal-Hoyos iD, Leidy Katherine Gil-Tabares, Natalia Giraldo-Vélez, Martha Isabel Torres-Arteaga iD, Catalina Garces-Gonzalez iD, Olga Patricia López-Soto, Héctor Fuentes-Barría iD, Raúl Aguilera-Eguía iD, Lisse Angarita-Davila iD

Materials · 20.03.2026 · 19 (6) · 1239

DOI: 10.3390/ma19061239 ↗

Kurz gefasst

Studienprotokoll in der Zeitschrift Materials, online erschienen am 20.03.2026. Verfasst von Juan Alberto Aristizábal-Hoyos und 8 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Salud Oral, Facultad de Salud, Universidad Autónoma de Manizales, Manizales 170008, Colombia. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To evaluate the biomechanical effects of varying posterior implant inclinations and loading protocols on peri-implant stress distribution in full-arch maxillary rehabilitations using the All-on-Four concept. Methodology: A three-dimensional finite element model of an edentulous atrophic maxilla was developed from a digital point cloud. Four implants were placed according to the All-on-Four protocol: two anterior vertical implants and two posterior implants with inclinations of 0°, 15°, 30°, or 45°. Mini-abutments and a titanium bar prosthesis were included. Material properties were assumed as homogeneous, isotropic, and linearly elastic. Immediate loading was simulated using frictional contacts (µ = 0.3), whereas delayed loading assumed complete osseointegration (bonded contacts). The models were meshed using 10-node quadratic tetrahedral elements (SOLID187) in ANSYS®. Maximum von Mises stress in cortical bone, cancellous bone, implants, abutments, and the prosthetic bar was assessed.

Results

Posterior implant tilt significantly reduced peri-implant stress. Under immediate loading, the highest stress occurred at 0° inclination in the posterior left implant (82.36 MPa) and decreased progressively with increasing tilt, reaching 33.63 MPa at 45° (≈59% reduction). Delayed loading generally produces lower stress magnitudes, particularly at extreme tilts. Anterior implants experienced lower stress levels across all configurations. Comparative analysis demonstrated that immediate loading increased stress at lower angulations, while differences between loading protocols were minimal at higher inclinations.

Conclusions

Posterior implant angulation and loading protocol critically influence peri-implant stress distribution. Increased posterior tilt combined with appropriate loading reduces peak cortical bone stresses, supporting biomechanical optimization in All-on-Four maxillary rehabilitations.

Schlagwörter

Stichwörter der Autor:innen

dental implantsedentulousfinite element analysisimmediate dental implant loadingjawrehabilitation

Autor:innen und Institutionen

  • Departamento de Salud Oral, Facultad de Salud, Universidad Autónoma de Manizales, Manizales 170008, Colombia.
  • Centro de Investigación en Medicina de Altura (CEIMA), Universidad Arturo Prat, Iquique 1110939, Chile.
  • Departamento de Salud Pública, Facultad de Medicina, Universidad Católica de la Santísima Concepción, Concepción 3349001, Chile.
  • Escuela de Nutrición y Dietética, Facultad de Medicina, Universidad Andres Bello, Concepción 3349001, Chile.

ORCID-Profile: Juan Alberto Aristizábal-Hoyos, Martha Isabel Torres-Arteaga, Catalina Garces-Gonzalez, Héctor Fuentes-Barría, Raúl Aguilera-Eguía, Lisse Angarita-Davila

Zitieren

APA

Aristizábal-Hoyos, J. A., Gil-Tabares, L. K., Giraldo-Vélez, N., Torres-Arteaga, M. I., Garces-Gonzalez, C., López-Soto, O. P., Fuentes-Barría, H., Aguilera-Eguía, R., & Angarita-Davila, L. (2026). Finite Element Analysis of Peri-Implant Stress in Maxillary All-on-Four Rehabilitation: Effects of Posterior Implant Angulation and Loading Protocol. Materials, 19(6), 1239. https://doi.org/10.3390/ma19061239

Vancouver

Aristizábal-Hoyos JA, Gil-Tabares LK, Giraldo-Vélez N, Torres-Arteaga MI, Garces-Gonzalez C, López-Soto OP, et al. Finite Element Analysis of Peri-Implant Stress in Maxillary All-on-Four Rehabilitation: Effects of Posterior Implant Angulation and Loading Protocol. Materials. 2026;19(6):1239. doi:10.3390/ma19061239

BibTeX
@article{AristizbalHoyos2026,
  author = {Aristizábal-Hoyos, Juan Alberto and Gil-Tabares, Leidy Katherine and Giraldo-Vélez, Natalia and Torres-Arteaga, Martha Isabel and Garces-Gonzalez, Catalina and López-Soto, Olga Patricia and Fuentes-Barría, Héctor and Aguilera-Eguía, Raúl and Angarita-Davila, Lisse},
  title = {Finite Element Analysis of Peri-Implant Stress in Maxillary All-on-Four Rehabilitation: Effects of Posterior Implant Angulation and Loading Protocol},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {1239},
  doi = {10.3390/ma19061239}
}
Kostenlos starten →