EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic-Assisted Preparation of Silanized Nanocellulose and Its Regulatory Effect on Mechanical–Thermal Properties of LCD 3D Printing Photosensitive Resin

Jingyi Liu, Yuan Fang, Shizhuo Xiao, Chenxi Song, Chenghua Sun, Shuai Han, Wangjing Ma

Processes · 19.02.2026 · 14 (4) · 698

DOI: 10.3390/pr14040698 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 19.02.2026. Verfasst von Jingyi Liu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cellulose nanofibrils (CNFs), with their high aspect ratio, have been widely used in various resin-based composites. To address the issues of easy agglomeration and poor interfacial compatibility of CNFs in hydrophobic acrylate photosensitive resins, this study adopted γ-methacryloyloxypropyltrimethoxysilane (KH570) for silane modification of CNFs, comparing heating–ultrasonication and heating–stirring methods. Mechanical properties were tested via LCD 3D printer to print splines. FTIR, XRD, and SEM verified successful modification, with the silicon substitution degree of heating–ultrasonication modification reaching 29.35%, significantly higher than heating–stirring (22.76%). Thermal analysis showed the main decomposition temperature increased from 400 °C to 420 °C, while DMA confirmed improved rigidity and glass transition temperature. Mechanical tests revealed a strength–toughness trade-off: the 1 wt% modified CNF composite exhibited a tensile strength of 45.17 MPa (9.41 MPa higher than unmodified CNFs at the same dosage), while a high dosage (3.5 wt%) enhanced toughness but reduced strength. The ultrasound-assisted silanization reaction proposed in this study optimizes the preparation process, achieving dual improvements in modification efficiency and dispersion. In terms of performance regulation, it reveals the quantitative control rules and trade-off characteristics of modified CNF content on the mechanical–thermal properties of the composites, providing a basis for performance customization. This study provides a feasible strategy for CNF modification in photopolymerizable 3D printing composites, expanding nanocellulose’s application in additive manufacturing.

Zitieren

APA

Liu, J., Fang, Y., Xiao, S., Song, C., Sun, C., Han, S., & Ma, W. (2026). Ultrasonic-Assisted Preparation of Silanized Nanocellulose and Its Regulatory Effect on Mechanical–Thermal Properties of LCD 3D Printing Photosensitive Resin. Processes, 14(4), 698. https://doi.org/10.3390/pr14040698

Vancouver

Liu J, Fang Y, Xiao S, Song C, Sun C, Han S, et al. Ultrasonic-Assisted Preparation of Silanized Nanocellulose and Its Regulatory Effect on Mechanical–Thermal Properties of LCD 3D Printing Photosensitive Resin. Processes. 2026;14(4):698. doi:10.3390/pr14040698

BibTeX
@article{Liu2026,
  author = {Liu, Jingyi and Fang, Yuan and Xiao, Shizhuo and Song, Chenxi and Sun, Chenghua and Han, Shuai and Ma, Wangjing},
  title = {Ultrasonic-Assisted Preparation of Silanized Nanocellulose and Its Regulatory Effect on Mechanical–Thermal Properties of LCD 3D Printing Photosensitive Resin},
  journal = {Processes},
  year = {2026},
  volume = {14},
  number = {4},
  pages = {698},
  doi = {10.3390/pr14040698}
}
Kostenlos starten →