EUVIMEDEUVIMED entdecken
Crossref

Preparation and Characterization of Excellent Performance Photosensitive Resin Suitable for Photocuring 3D Printing

Haiwei Ma, Xianzhe Li, Xin Ding, Chunlei Cao, Jianying Ma

Journal of Polymer Science · 15.08.2025 · 63 (16) · 3456-3467

DOI: 10.1002/pol.20250409 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Science, online erschienen am 20.06.2025. Verfasst von Haiwei Ma und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper aimed to prepare oligomers (IA‐GMA) through ring‐opening reactions using biologically derived itaconic acid (IA) and epoxy methacrylate (GMA). By mixing IA‐GMA, isobornyl acrylate (IBOA), and various diluents, followed by dilution and addition of photoinitiators and crosslinking agents, a light‐curing resin for 3D printing was prepared. The ring‐opening reaction introduced a large number of double bonds into IA‐GMA to enhance photopolymerization efficiency; the resin formulation was optimized by changing the type of diluent and the concentration of photoinitiator. The mechanical properties, thermal performance, and flexibility of the 3D printing material were systematically studied. Experimental results showed that when acrylamide (ACMO) was used as a diluent and the photoinitiator concentration was 4 wt%, the light‐curing resin exhibited excellent mechanical properties and thermal stability. The impact strength reached 1.88 kJ/m 2 , the tensile strength reached 41 MPa, and it also had excellent flexibility (540° in one direction). Compared with traditional petroleum‐based resins, the light‐curing resin based on IA showed no significant performance disadvantage, contributing to the development of environmentally friendly, balanced‐performance photopolymer resins for additive manufacturing applications.

Zitieren

APA

Ma, H., Li, X., Ding, X., Cao, C., & Ma, J. (2025). Preparation and Characterization of Excellent Performance Photosensitive Resin Suitable for Photocuring 3D Printing. Journal of Polymer Science, 63(16), 3456-3467. https://doi.org/10.1002/pol.20250409

Vancouver

Ma H, Li X, Ding X, Cao C, Ma J. Preparation and Characterization of Excellent Performance Photosensitive Resin Suitable for Photocuring 3D Printing. Journal of Polymer Science. 2025;63(16):3456-3467. doi:10.1002/pol.20250409

BibTeX
@article{Ma2025,
  author = {Ma, Haiwei and Li, Xianzhe and Ding, Xin and Cao, Chunlei and Ma, Jianying},
  title = {Preparation and Characterization of Excellent Performance Photosensitive Resin Suitable for Photocuring 3D Printing},
  journal = {Journal of Polymer Science},
  year = {2025},
  volume = {63},
  number = {16},
  pages = {3456--3467},
  doi = {10.1002/pol.20250409}
}
Kostenlos starten →