EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization Design of Injection Mold Conformal Cooling Channel for Improving Cooling Rate

Jinyi Li, Yung Chieh Ong, Wan Mansor Wan Muhamad

Processes · 15.06.2024 · 12 (6) · 1232

DOI: 10.3390/pr12061232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 15.06.2024. Verfasst von Jinyi Li und 2 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo Polytechnic China Light Industry Plastic Mold Engineering Technology Research Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optimizing the design of the conformal cooling channel can increase the cooling rate of injection mold. The aim of this study was the problem of low cooling efficiency of injection mold for deep-cavity plastic parts under the conventional cooling channel. Based on the analysis of the heat transfer principle of the injection mold, a mathematical description of the cooling time of the conformal cooling channel was made. By designing orthogonal experiments and using simulation methods in the Autodesk Moldflow 2019 software, with the minimum cooling time of the mold as the optimization goal, experimental optimization was carried out for the three design variables of the channel, thereby obtaining the optimal combination of design variables for the conformal cooling channel. The conformal cooling channel layout was innovatively designed, and through computer simulation experiments, it was concluded that the conformal cooling channel adopted a series flat-head layout, which has the shortest cooling time and the fastest cooling rate. Metal additive manufacturing technology was used to complete the manufacturing of the mold insert with the conformal cooling channel. After the trial production of the conformal cooling injection mold, the molding cycle was obviously shortened, and the injection molding production efficiency was significantly improved.

Förderung

  • Ningbo Polytechnic China Light Industry Plastic Mold Engineering Technology Research Center

Zitieren

APA

Li, J., Ong, Y. C., & Muhamad, W. M. W. (2024). Optimization Design of Injection Mold Conformal Cooling Channel for Improving Cooling Rate. Processes, 12(6), 1232. https://doi.org/10.3390/pr12061232

Vancouver

Li J, Ong YC, Muhamad WMW. Optimization Design of Injection Mold Conformal Cooling Channel for Improving Cooling Rate. Processes. 2024;12(6):1232. doi:10.3390/pr12061232

BibTeX
@article{Li2024,
  author = {Li, Jinyi and Ong, Yung Chieh and Muhamad, Wan Mansor Wan},
  title = {Optimization Design of Injection Mold Conformal Cooling Channel for Improving Cooling Rate},
  journal = {Processes},
  year = {2024},
  volume = {12},
  number = {6},
  pages = {1232},
  doi = {10.3390/pr12061232}
}
Kostenlos starten →