EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Generative design of conformal cooling channels for hybrid-manufactured injection moulding tools

Neil Wilson, Manhar Gupta, Milan Patel, Maciej Mazur, Vu Nguyen, Stefan Gulizia, Ivan Cole

The International Journal of Advanced Manufacturing Technology · 2024-07 · 133 (1-2) · 861-888

DOI: 10.1007/s00170-024-13754-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 27.05.2024. Verfasst von Neil Wilson und 6 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Melbourne Institute of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Effective cooling systems for injection moulding (IM) tools are critical to reducing manufacturing costs and cycle time for the polymer parts produced. This work presents a novel automated methodology for designing conformal cooling channels (CCCs) for IM tools via interlinking commercial moulding simulation tools with custom scripts. These scripts adjust CCC design in response to the spatial variability in global and local temperatures at the mould tool-part interface (MTPI) via generative design (GD). Four tool designs for manufacturing a simplified part were analysed numerically simulation and experimentally, including tools with either straight-drilled (non-conformal) cooling channels (tool steel), a manually designed CCC system (stainless steel or bronze alloy), or an automatically designed CCC system (stainless steel). While both manually designed CCC tools cool the part faster than the non-conformal tool (3–5% predicted vs. 40% measured for stainless steel and 9–12% predicted vs. 40% measured for bronze alloy), the GD-optimised CCC tool outperformed both (15–30% predicted faster cooling vs. 70% measured). The predicted MTPI temperature feature achieves reductions to both maximum and spatial variability in MTPI temperatures, which lead directly to significant reductions in manufacturing cycle time and polymer part warpage. These findings could have a major impact on the IM industry by reducing tool design costs and raw material waste via improving moulded part quality.

Förderung

  • Royal Melbourne Institute of Technology

Zitieren

APA

Wilson, N., Gupta, M., Patel, M., Mazur, M., Nguyen, V., Gulizia, S., & Cole, I. (2024). Generative design of conformal cooling channels for hybrid-manufactured injection moulding tools. The International Journal of Advanced Manufacturing Technology, 133(1-2), 861-888. https://doi.org/10.1007/s00170-024-13754-x

Vancouver

Wilson N, Gupta M, Patel M, Mazur M, Nguyen V, Gulizia S, et al. Generative design of conformal cooling channels for hybrid-manufactured injection moulding tools. The International Journal of Advanced Manufacturing Technology. 2024;133(1-2):861-888. doi:10.1007/s00170-024-13754-x

BibTeX
@article{Wilson2024,
  author = {Wilson, Neil and Gupta, Manhar and Patel, Milan and Mazur, Maciej and Nguyen, Vu and Gulizia, Stefan and Cole, Ivan},
  title = {Generative design of conformal cooling channels for hybrid-manufactured injection moulding tools},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {133},
  number = {1-2},
  pages = {861--888},
  doi = {10.1007/s00170-024-13754-x}
}
Kostenlos starten →