EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Separating Energy and Recurring-Cost Parity for Post-Consumer Polyolefins: Mechanical Recycling and Pyrolysis of HDPE and PP

Junaid Saleem, Zubair Khalid Baig Moghal, Gordon McKay

Polymers · 12.11.2026 · 18 (22) · 2834

DOI: 10.3390/polym18222834 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.11.2026. Verfasst von Junaid Saleem und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Selecting a recycling route for post-consumer polyolefins requires distinguishing energy savings from purchased-input cost reductions, yet the two are often assumed to coincide. Here, mechanical recycling and pyrolysis of high-density polyethylene (HDPE) and polypropylene (PP) were compared to test whether equal energy demand implies equal operating cost. The functional unit (FU) covered pretreatment and conversion of waste supplying 1 kg of clean, dry polymer. Calculated extrusion electricity and an engineering-based pyrolysis inventory supported energy and recurring-cost models. Across the three cases, base cumulative energy demand was 12.8–14.2 MJ/FU and recurring costs 0.030–0.033 USD/FU. Direct-energy parity occurred at extrusion electricity of 0.7766 kWh/kg, but cost parity at base prices occurred at 0.8431 kWh/kg. Between these values, mechanical recycling used more energy but cost less, because avoided purge nitrogen outweighed its additional electricity and cooling-water costs. HDPE (0.838 kWh/kg) fell within this interval, whereas for PP (0.711 kWh/kg) mechanical recycling was favored on both energy and cost. Jointly varying conversion electricity, nitrogen consumption and prices reversed the cost orderings for both polymers within the tested ranges. Lower energy demand therefore does not guarantee lower operating cost; routes should be compared on both bases. These results concern processing only, not product equivalence or plant profitability.

Zitieren

APA

Saleem, J., Moghal, Z. K. B., & McKay, G. (2026). Separating Energy and Recurring-Cost Parity for Post-Consumer Polyolefins: Mechanical Recycling and Pyrolysis of HDPE and PP. Polymers, 18(22), 2834. https://doi.org/10.3390/polym18222834

Vancouver

Saleem J, Moghal ZKB, McKay G. Separating Energy and Recurring-Cost Parity for Post-Consumer Polyolefins: Mechanical Recycling and Pyrolysis of HDPE and PP. Polymers. 2026;18(22):2834. doi:10.3390/polym18222834

BibTeX
@article{Saleem2026,
  author = {Saleem, Junaid and Moghal, Zubair Khalid Baig and McKay, Gordon},
  title = {Separating Energy and Recurring-Cost Parity for Post-Consumer Polyolefins: Mechanical Recycling and Pyrolysis of HDPE and PP},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2834},
  doi = {10.3390/polym18222834}
}
Kostenlos starten →