Mechanical Recycling of PET Multi-Layer Post-Consumer Packaging: Effects of Impurity Content
Recycling · 08.10.2024 · 9 (5) · 93
DOI: 10.3390/recycling9050093 ↗Kurz gefasst
Fachartikel in der Zeitschrift Recycling, online erschienen am 08.10.2024. Verfasst von Giusy Santomasi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 100 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ISPT (Institute for Sustainable Process Technology) and DPI in The Netherlands, the Netherlands Enterprise Agency (RVO).
Abstract (Originalsprache)
The recycling of PET trays is highly challenging. The aim of this paper was to investigate the issues related to the mechanical recycling process and, the correlation between feedstock composition and the quality of the produced rPET. Four feedstocks with different degrees of impurity were mechanically recycled at a laboratory pilot scale. The optical and thermal properties of the rPET products were examined to determine the quality and to seek relations with the starting level of impurities. The final products of the PET trays’ mechanical recycling were found to be affected by the presence of impurities (organics) and multi-material (non-PET) elements in the feedstocks. The rPET products crystallised faster for contaminated feedstocks showed lower molecular mass and higher yellow index values due to thermal degradation. Yellowing is a crucial parameter in assessing the thermal degradation of rPET. Injection moulded samples corresponding to higher contamination levels, reported values of Yellow Index equal to 179 and 177 compared to 15 of mono-PET sample. The intrinsic viscosity decreased from 0.60 dL/g to just above 0.30 dL/g, and losses were more significant for soiled or multi-material feedstocks. A method of improving the final quality would involve the purification of the starting feedstock from impurities.
Förderung
- ISPT (Institute for Sustainable Process Technology) and DPI in The Netherlands
- the Netherlands Enterprise Agency (RVO)
Zitieren
APA
Santomasi, G., Todaro, F., Petrella, A., Notarnicola, M., & Velzen, E. U. T. V. (2024). Mechanical Recycling of PET Multi-Layer Post-Consumer Packaging: Effects of Impurity Content. Recycling, 9(5), 93. https://doi.org/10.3390/recycling9050093
Vancouver
Santomasi G, Todaro F, Petrella A, Notarnicola M, Velzen EUTV. Mechanical Recycling of PET Multi-Layer Post-Consumer Packaging: Effects of Impurity Content. Recycling. 2024;9(5):93. doi:10.3390/recycling9050093
BibTeX
@article{Santomasi2024,
author = {Santomasi, Giusy and Todaro, Francesco and Petrella, Andrea and Notarnicola, Michele and Velzen, Eggo Ulphard Thoden van},
title = {Mechanical Recycling of PET Multi-Layer Post-Consumer Packaging: Effects of Impurity Content},
journal = {Recycling},
year = {2024},
volume = {9},
number = {5},
pages = {93},
doi = {10.3390/recycling9050093}
}
EUVIMED