EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Homogenization Equivalence Modeling of Honeycomb Bending Considering Regional Deformation Differences

Wangzi Liu, Guangjie Huang iD, Xianmo Wang, Yingwei Yu, Zhihui Liu, Haixin Guan, Jingping Zhu, Yu Wang

Polymers · 2026-08-13 · 18 (16) · 1970

DOI: 10.3390/polym18161970 ↗

At a glance

Journal article in Polymers, published online on 2026-08-13. Written by Wangzi Liu and 7 co-authors. Institution: College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China. 20 references. The full text is freely available (open access, CC BY 4.0). Funded by: Suqian Sci & Tech Program, China, Jiangxi Training Project of high-level and high-skill leading talents.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

A Nomex aramid paper honeycomb sandwich structure is the core material of the main load-bearing structures in aviation. Macroscopic full-scale refined modeling faces the problems of large mesh quantity and high calculation cost. Homogenization equivalence is the core path to achieve its efficient simulation design. Most of the existing mature equivalent models are based on the ideal assumption that the honeycomb always remains macroscopically straight, without considering the equivalent performance changes caused by the morphological distortion of micro-cells under bending conditions. Therefore, it is difficult to support a high-precision simulation of large-curvature special-shaped honeycomb sandwich structures. This paper takes the over-stretched rectangular lattice aramid honeycomb as the research object. The mechanical parameters of the matrix are calibrated through experiments, and the reliability of the fine shell finite element model is verified (the maximum error of the end-face strain characteristics between simulation and the DIC test is less than 10%). A customized finite element sample matrix for compression bending is designed, and the angle distribution laws of honeycomb cells under different thicknesses and different bending curvatures are extracted. It is found that the cell angle shows a linear change trend along the wall-thickness direction, which is only strongly correlated with the initial geometric parameters and the bending radius. Finally, a semi-empirical model that can quickly predict the morphology of bent honeycomb cells is obtained through fitting. Verified by the glass compression-molding visualization experiment, the maximum relative error of the predicted cell angle is only 5.05%. This research establishes a rapid characterization method for the deformation of honeycomb cells under bending deformation, providing theoretical support for the microscopic homogenization equivalent modeling of curved honeycomb sandwich structures.

Subjects

Author keywords

aramid paper honeycombcell deformationfinite element simulationhomogenization equivalence

Authors and institutions

  • College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
  • Changhe Aircraft Industry (Group) Co., Ltd., Jingdezhen 333000, China.
  • Jiang Xi Aircraft Airworthiness Certification Center, CAAC, Nanchang 330098, China.
  • College of Electromechanical Engineering, Suqian University, Suqian 223800, China.

ORCID profiles: Guangjie Huang

Funding

  • Suqian Sci & Tech Program, China
  • Jiangxi Training Project of high-level and high-skill leading talents

Cite

APA

Liu, W., Huang, G., Wang, X., Yu, Y., Liu, Z., Guan, H., Zhu, J., & Wang, Y. (2026). Homogenization Equivalence Modeling of Honeycomb Bending Considering Regional Deformation Differences. Polymers, 18(16), 1970. https://doi.org/10.3390/polym18161970

Vancouver

Liu W, Huang G, Wang X, Yu Y, Liu Z, Guan H, et al. Homogenization Equivalence Modeling of Honeycomb Bending Considering Regional Deformation Differences. Polymers. 2026;18(16):1970. doi:10.3390/polym18161970

BibTeX
@article{Liu2026,
  author = {Liu, Wangzi and Huang, Guangjie and Wang, Xianmo and Yu, Yingwei and Liu, Zhihui and Guan, Haixin and Zhu, Jingping and Wang, Yu},
  title = {Homogenization Equivalence Modeling of Honeycomb Bending Considering Regional Deformation Differences},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {16},
  pages = {1970},
  doi = {10.3390/polym18161970}
}
Start for free →