EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Theoretical Modeling and Experimental Verification of the Bending Deformation of Fiber Metal Laminates

Yizhe Chen, Zhuoqun Wang, Yi Lin, Hui Wang, Lin Hua

Materials · 30.04.2023 · 16 (9) · 3486

DOI: 10.3390/ma16093486 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.04.2023. Verfasst von Yizhe Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Young Elite Scientists Sponsorship Program by CAST, National Natural Science Foundation of China, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber metal laminates have been widely used as the primary materials in aircraft panels, and have excellent specific strength. Bending deformation is the most common loading mode of such components. An accurate theoretical predictive model for the bending process for the carbon reinforced aluminum laminates is of great significance for predicting the actual stress response. In this paper, based on the metal-plastic bending theory and the modified classical fiber laminate theory, a modified bending theory model of carbon-fiber-reinforced aluminum laminates was established. The plastic deformation of the thin metal layer in laminates and the interaction between fiber and metal interfaces were considered in this model. The bending strength was predicted analytically. The FMLs were made from 5052 aluminum sheets, with carbon fibers as the reinforcement, and were bonded and cured by locally manufacturers. The accuracy of the theory was verified by three-point bending experiments, and the prediction error was 8.4%. The results show that the fiber metal laminates consisting of three layers of aluminum and two layers of fiber had the best bending properties. The theoretical model could accurately predict the bending deformation behaviors of fiber metal laminates, and has significant value for the theoretical analysis and performance testing of laminates.

Schlagwörter

Stichwörter der Autor:innen

computational modellingelastic-plastic bendingfiber metal laminatesmechanical properties

Autor:innen und Institutionen

  • Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China.
  • Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan 430070, China.
  • Jiangsu Xinyang New Material Co., Ltd., Yangzhou 225000, China.
  • Hubei Engineering Research Center for Green & Precision Material Forming Technology, Wuhan 430070, China.
  • Hubei Longzhong Laboratory, Xiangyang 441000, China.

Förderung

  • Young Elite Scientists Sponsorship Program by CAST
  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation
  • National Natural Science Foundation Council of China

Zitieren

APA

Chen, Y., Wang, Z., Lin, Y., Wang, H., & Hua, L. (2023). Theoretical Modeling and Experimental Verification of the Bending Deformation of Fiber Metal Laminates. Materials, 16(9), 3486. https://doi.org/10.3390/ma16093486

Vancouver

Chen Y, Wang Z, Lin Y, Wang H, Hua L. Theoretical Modeling and Experimental Verification of the Bending Deformation of Fiber Metal Laminates. Materials. 2023;16(9):3486. doi:10.3390/ma16093486

BibTeX
@article{Chen2023,
  author = {Chen, Yizhe and Wang, Zhuoqun and Lin, Yi and Wang, Hui and Hua, Lin},
  title = {Theoretical Modeling and Experimental Verification of the Bending Deformation of Fiber Metal Laminates},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {9},
  pages = {3486},
  doi = {10.3390/ma16093486}
}
Kostenlos starten →