EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of 3D-Printed Thermoplastic Polyurethane Nerve Guidance Conduits

Alexis B Sabido-Barahona iD, Rossana F Vargas-Coronado iD, Claudia Vásquez-López iD, Abraham J Cisneros-Mejorado iD, Rainald Pablo Ordaz, Reinher Pimentel-Domínguez iD, Antònia Colom-Casasnovas iD, Rogelio O Arellano iD, Juan V Cauich-Rodríguez iD, Angel Marcos-Fernández iD

Polymers · 29.07.2026 · 18 (15) · 1865

DOI: 10.3390/polym18151865 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.07.2026. Verfasst von Alexis B Sabido-Barahona und 9 weiteren Autor:innen. Beteiligte Einrichtung: Materials Department, Centro de Investigación Científica de Yucatán, A. C., Calle 43 No. 130 x 32 y 34, Col. Chuburná de Hidalgo, Mérida 97205, YUC, …. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Consejo Nacional de Ciencia y Tecnología (CONACYT), Ministerio de Economía y Competitividad (MINECO), Universidad Nacional Autónoma de México.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused deposition modeling (FDM) is an emerging trend for producing nerve guidance conduits (NGCs). This technique allows distinct designs and dimensions to mimic peripheral nerve architecture and promote nerve regeneration. In this study, commercially available TPU 90A and 95A filaments were used for the fabrication of hollow simple wall (non-porous), grooved and gyroid multichannel conduits. The segmented polyurethanes were identified as PBA-MDI-BO-based polyurethanes by 1H NMR, FTIR and Raman spectroscopy. Thermal analyses, such as DSC and TGA, demonstrated that both TPUs possess sufficient thermal stability to be processed safely under the printing conditions employed. Tensile mechanical tests accounted for their differences in hard segment content in agreement with the Shore A hardness. The measured elastic modulus, in particular, was within a range that may be advantageous for peripheral nerve repair. The gyroid multichannel design showed enhanced resistance to radial compression and highly interconnected internal structure that supported primary neural cell viability and preserved cellular functionality. Therefore, polyurethane-based nerve guidance conduits can be manufactured by FDM, rendering high printability, favorable mechanical performance without compromising biocompatibility.

Schlagwörter

Stichwörter der Autor:innen

3D printingfused deposition modelingnerve guidance conduitperipheral nerve regenerationthermoplastic polyurethanes

Autor:innen und Institutionen

  • Materials Department, Centro de Investigación Científica de Yucatán, A. C., Calle 43 No. 130 x 32 y 34, Col. Chuburná de Hidalgo, Mérida 97205, YUC, Mexico.
  • Departamento de Física, Universidad de Sonora, Encinas y Rosales, s/n., Hermosillo 83000, SON, Mexico.
  • Laboratorio de Neurofisiología Celular, Instituto de Neurobiología, Universidad Nacional Autónoma de México (UNAM), Boulevard Juriquilla 3001, Querétaro 76230, QRO, Mexico.
  • Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México (UNAM), Boulevard Juriquilla 3001, Querétaro 76230, QRO, Mexico.
  • Institute of Polymer Science and Technology (ICTP-CSIC), Juan de la Cierva, 3, 28006 Madrid, Spain.

ORCID-Profile: Alexis B Sabido-Barahona, Rossana F Vargas-Coronado, Claudia Vásquez-López, Abraham J Cisneros-Mejorado, Reinher Pimentel-Domínguez, Antònia Colom-Casasnovas, Rogelio O Arellano, Juan V Cauich-Rodríguez, Angel Marcos-Fernández

Förderung

  • Consejo Nacional de Ciencia y Tecnología (CONACYT)
  • Ministerio de Economía y Competitividad (MINECO)
  • Universidad Nacional Autónoma de México

Zitieren

APA

Sabido-Barahona, A. B., Vargas-Coronado, R. F., Vásquez-López, C., Cisneros-Mejorado, A. J., Ordaz, R. P., Pimentel-Domínguez, R., Colom-Casasnovas, A., Arellano, R. O., Cauich-Rodríguez, J. V., & Marcos-Fernández, A. (2026). Evaluation of 3D-Printed Thermoplastic Polyurethane Nerve Guidance Conduits. Polymers, 18(15), 1865. https://doi.org/10.3390/polym18151865

Vancouver

Sabido-Barahona AB, Vargas-Coronado RF, Vásquez-López C, Cisneros-Mejorado AJ, Ordaz RP, Pimentel-Domínguez R, et al. Evaluation of 3D-Printed Thermoplastic Polyurethane Nerve Guidance Conduits. Polymers. 2026;18(15):1865. doi:10.3390/polym18151865

BibTeX
@article{SabidoBarahona2026,
  author = {Sabido-Barahona, Alexis B and Vargas-Coronado, Rossana F and Vásquez-López, Claudia and Cisneros-Mejorado, Abraham J and Ordaz, Rainald Pablo and Pimentel-Domínguez, Reinher and Colom-Casasnovas, Antònia and Arellano, Rogelio O and Cauich-Rodríguez, Juan V and Marcos-Fernández, Angel},
  title = {Evaluation of 3D-Printed Thermoplastic Polyurethane Nerve Guidance Conduits},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {15},
  pages = {1865},
  doi = {10.3390/polym18151865}
}
Kostenlos starten →