Reusable 3D-Printed Thermoplastic Polyurethane Honeycombs for Mechanical Energy Absorption
Polymers · 16.11.2025 · 17 (22) · 3035
DOI: 10.3390/polym17223035 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 16.11.2025. Verfasst von Alin Bustihan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics of Condensed Matter and Advanced Technologies, Faculty of Physics, Babeș-Bolyai University, 400084 Cluj-Napoca, Romania. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, we investigate the mechanical energy absorption performance of reusable 3D-printed honeycomb structures fabricated using fused deposition modeling with three thermoplastic polyurethane variants: TPU 70A, TPU 85A, and TPU 95A. Prior to manufacturing, the mechanical properties of the TPU filaments were analyzed as a function of printing temperature to optimize tensile strength and layer adhesion. Four honeycomb configurations, including hexagonal and circular cell geometries, both with and without a 30° twist, were subjected to out-of-plane compression testing to evaluate energy absorption efficiency, specific energy absorption, and crushing load efficiency. The highest energy absorption efficiency, 47%, was achieved by the hexagonal honeycomb structure fabricated from TPU 95A, surpassing the expected values for expanded polystyrene and approaching the performance reported for high-cost advanced lattice structures. Additionally, twisted honeycomb configurations exhibited improved crushing load efficiency values (up to 73.5%), indicating better stress distribution and enhanced reusability. Despite variations in absorbed energy, TPU 95A demonstrated the best balance of elasticity, structural integrity, and reusability across multiple compression cycles. These findings suggest that TPU-based honeycomb structures could provide a viable, cost-effective alternative for energy-absorbing applications in impact protection systems, automotive safety, and sports equipment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics of Condensed Matter and Advanced Technologies, Faculty of Physics, Babeș-Bolyai University, 400084 Cluj-Napoca, Romania.
- Interdisciplinary Research Institute on Bio-Nano-Sciences, Babeș-Bolyai University, 400271 Cluj-Napoca, Romania.
ORCID-Profile: Ioan Botiz
Zitieren
APA
Bustihan, A., Hirian, R., & Botiz, I. (2025). Reusable 3D-Printed Thermoplastic Polyurethane Honeycombs for Mechanical Energy Absorption. Polymers, 17(22), 3035. https://doi.org/10.3390/polym17223035
Vancouver
Bustihan A, Hirian R, Botiz I. Reusable 3D-Printed Thermoplastic Polyurethane Honeycombs for Mechanical Energy Absorption. Polymers. 2025;17(22):3035. doi:10.3390/polym17223035
BibTeX
@article{Bustihan2025,
author = {Bustihan, Alin and Hirian, Razvan and Botiz, Ioan},
title = {Reusable 3D-Printed Thermoplastic Polyurethane Honeycombs for Mechanical Energy Absorption},
journal = {Polymers},
year = {2025},
volume = {17},
number = {22},
pages = {3035},
doi = {10.3390/polym17223035}
}
EUVIMED