Experimental and Numerical Investigations on Compressive Performance of Additively Manufactured PLA Structures with Various Infill Patterns
Polymers · 28.07.2026 · 18 (15) · 1845
DOI: 10.3390/polym18151845 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.07.2026. Verfasst von Alexandra Llidó Barragán und 4 weiteren Autor:innen. Beteiligte Einrichtung: Instituto Universitario de Investigación de Tecnología de Materiales, Universitat Politècnica de València, Plaza Ferrándiz y Carbonell, 03801 Alcoy, …. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia, Innovación y Universidades.
Abstract (Originalsprache)
Additive manufacturing, particularly Fused Deposition Modeling (FDM), has emerged as a promising technology for construction applications due to its ability to fabricate complex geometries, optimize material usage, and enable customized designs. This study investigates the effects of different infill patterns and densities on the compressive behavior of polylactic acid (PLA) specimens to identify suitable configurations for industrial applications. Cubic specimens (50 mm × 50 mm × 50 mm) were designed in SolidWorks, sliced with PrusaSlicer using various conventional and bio-inspired infill patterns, and manufactured using a Prusa i3 MK3S printer. Compression tests were conducted to evaluate stiffness, strength, toughness, and deformation capacity. In addition, finite element method (FEM) simulations were carried out to predict the mechanical response under compressive loading. The results showed that the honeycomb infill pattern provided the best overall performance, combining moderate stiffness with high deformation capacity, reaching strains of approximately 40% before failure, and exhibiting superior energy absorption. Among the tested configurations, an infill density of 20% offered the best balance between mechanical performance, material consumption, and printing time. These findings demonstrate that honeycomb-based structures with moderate infill densities are promising candidates for lightweight engineering applications requiring high energy dissipation and damage tolerance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Instituto Universitario de Investigación de Tecnología de Materiales, Universitat Politècnica de València, Plaza Ferrándiz y Carbonell, 03801 Alcoy, Spain.
- Department of Automotive and Transport Engineering, Transilvania University of Brasov (UniTBv), 1 Politehnicii Street, 500024 Brasov, Romania.
ORCID-Profile: Alexandra Llidó Barragán, Aritz Unamuno Garay, Santiago Ferrándiz-Bou, Dana Luca Motoc, Cristina Pavón
Förderung
- Ministerio de Ciencia, Innovación y Universidades
Zitieren
APA
Llidó Barragán, A., Unamuno Garay, A., Ferrándiz-Bou, S., Motoc, D. L., & Pavón, C. (2026). Experimental and Numerical Investigations on Compressive Performance of Additively Manufactured PLA Structures with Various Infill Patterns. Polymers, 18(15), 1845. https://doi.org/10.3390/polym18151845
Vancouver
Llidó Barragán A, Unamuno Garay A, Ferrándiz-Bou S, Motoc DL, Pavón C. Experimental and Numerical Investigations on Compressive Performance of Additively Manufactured PLA Structures with Various Infill Patterns. Polymers. 2026;18(15):1845. doi:10.3390/polym18151845
BibTeX
@article{LlidBarragn2026,
author = {Llidó Barragán, Alexandra and Unamuno Garay, Aritz and Ferrándiz-Bou, Santiago and Motoc, Dana Luca and Pavón, Cristina},
title = {Experimental and Numerical Investigations on Compressive Performance of Additively Manufactured PLA Structures with Various Infill Patterns},
journal = {Polymers},
year = {2026},
volume = {18},
number = {15},
pages = {1845},
doi = {10.3390/polym18151845}
}
EUVIMED