EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compressive Properties of Additively Manufactured Metal-Reinforced PLA and ABS Composites

Meelad Ranaiefar iD, Mrityunjay Singh, Jonathan A Salem iD, Michael C Halbig iD

Polymers · 13.07.2024 · 16 (14) · 2008

DOI: 10.3390/polym16142008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.07.2024. Verfasst von Meelad Ranaiefar und 3 weiteren Autor:innen. Beteiligte Einrichtung: NASA Glenn Research Center, Cleveland, OH 44135, USA. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NASA Revolutionary Vertical Lift Technology (RVLT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of multi-material filaments has enabled fused filament fabrication-based additive manufacturing to address demand for high-performance lightweight multifunctional components. In this study, polylactic acid (PLA) and acrylonitrile butadiene styrene based filaments with metallic reinforcements of magnetic iron (MI), stainless steel (SS), bronze (Br), copper (Cu), Bismuth (Bi), and Tungsten (W) were investigated to elucidate their complex processing–structure–property relationships. The microstructure of 3D-printed materials were characterized by microscopy and analyzed to determine the metal cross-sectional area percentage and the relationship between metal reinforcement, the polymer matrix, and porosity. Compression testing was conducted in directions parallel and perpendicular to the build direction in order to evaluate the effect of orientation and metal reinforcement on the mechanical properties. 3D-printed specimens experienced either fracture through print layers or layer-wise interfacial rupture for loads applied perpendicular and parallel to the print layers, respectively. A dependence of yield strength on loading orientation was observed for Br-PLA, Cu-PLA, SS-PLA, Bi-ABS, and W-ABS; however, MI-PLA and pure ABS specimens did not exhibit this sensitivity. Metal reinforcement also influenced the magnitude of compressive yield strength, with MI-PLA and SS-PLA demonstrating increased strength over Br-PLA and Cu-PLA, while ABS demonstrated increased strength over Bi-ABS and W-ABS. These results demonstrate the importance of considering orientation in printing and applications, the trade-off between various metallic reinforcements for added multifunctionality, and the potential of these tailored polymer composites for novel 3D-printed structures.

Schlagwörter

Stichwörter der Autor:innen

acrylonitrile butadiene styrene (ABS)additive manufacturingcompressionfused filament fabricationmechanical propertiesmetal-reinforced ABSmetal-reinforced polylactic acid (PLA)microstructurepolymer composites

Autor:innen und Institutionen

  • NASA Glenn Research Center, Cleveland, OH 44135, USA.
  • Ohio Aerospace Institute, Cleveland, OH 44142, USA.

ORCID-Profile: Meelad Ranaiefar, Jonathan A Salem, Michael C Halbig

Förderung

  • NASA Revolutionary Vertical Lift Technology (RVLT)

Zitieren

APA

Ranaiefar, M., Singh, M., Salem, J. A., & Halbig, M. C. (2024). Compressive Properties of Additively Manufactured Metal-Reinforced PLA and ABS Composites. Polymers, 16(14), 2008. https://doi.org/10.3390/polym16142008

Vancouver

Ranaiefar M, Singh M, Salem JA, Halbig MC. Compressive Properties of Additively Manufactured Metal-Reinforced PLA and ABS Composites. Polymers. 2024;16(14):2008. doi:10.3390/polym16142008

BibTeX
@article{Ranaiefar2024,
  author = {Ranaiefar, Meelad and Singh, Mrityunjay and Salem, Jonathan A and Halbig, Michael C},
  title = {Compressive Properties of Additively Manufactured Metal-Reinforced PLA and ABS Composites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {14},
  pages = {2008},
  doi = {10.3390/polym16142008}
}
Kostenlos starten →