Experimental and Numerical Verification of Continuous Carbon-Fibre Additively Manufactured Structures
Modelling · 15.05.2026 · 7 (3) · 94
DOI: 10.3390/modelling7030094 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling, online erschienen am 15.05.2026. Verfasst von Ivica Smojver und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Croatian Science Foundation, COST Action CA21155 Advanced Composites.
Abstract (Originalsprache)
This study investigates the mechanical behaviour of continuous carbon-fibre-reinforced additively manufactured composite structures aimed at applications in aeronautical structures, through a combination of experimental testing and numerical simulation. Tensile, compressive, and shear tests established stiffness and failure characteristics, while finite element analyses were used for a preliminary calibration-based reproduction of the measured coupon response, with an emphasis on the initial elastic part of the impact event. The integration of measured data with structural modelling provides a clearer understanding of load transfer and damage initiation in continuous-fibre AM, supporting more accurate simulation-based design of additively manufactured composite components. Experimental results show pronounced anisotropy, and a stable, rate-dependent impact response. The preliminary numerical model based on CT-derived homogenized properties accurately reproduces the initial part of the measured quasi-static and dynamic responses.
Förderung
- Croatian Science Foundation
- COST Action CA21155 Advanced Composites
Zitieren
APA
Smojver, I., Ivančević, D., Ušurić, F., Kuhtz, M., & Hornig, A. (2026). Experimental and Numerical Verification of Continuous Carbon-Fibre Additively Manufactured Structures. Modelling, 7(3), 94. https://doi.org/10.3390/modelling7030094
Vancouver
Smojver I, Ivančević D, Ušurić F, Kuhtz M, Hornig A. Experimental and Numerical Verification of Continuous Carbon-Fibre Additively Manufactured Structures. Modelling. 2026;7(3):94. doi:10.3390/modelling7030094
BibTeX
@article{Smojver2026,
author = {Smojver, Ivica and Ivančević, Darko and Ušurić, Fran and Kuhtz, Moritz and Hornig, Andreas},
title = {Experimental and Numerical Verification of Continuous Carbon-Fibre Additively Manufactured Structures},
journal = {Modelling},
year = {2026},
volume = {7},
number = {3},
pages = {94},
doi = {10.3390/modelling7030094}
}
EUVIMED