Dual Effects of Thermal Annealing on Rotomolded PLA Biocomposites: A Fiber-Content Study
Polymers · 23.07.2026 · 18 (15) · 1802
DOI: 10.3390/polym18151802 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 23.07.2026. Verfasst von Erick Omar Cisneros-López und 6 weiteren Autor:innen. Beteiligte Einrichtung: Centro Universitario de Ciencias Exactas e Ingenierías (CUCEI), Universidad de Guadalajara, Blvd. Gral. Marcelino García Barragán #1421, Guadalajara …. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad de Guadalajara.
Abstract (Originalsprache)
Rotational molding is a shear-free technology to produce hollow plastic parts. Rotomolded poly(lactic acid) (PLA) and its biocomposites remain in a largely amorphous state, which limits their stiffness, toughness, and thermal resistance. Post-processing thermal annealing develops crystallinity without additives, but its combined effect with natural fibers has rarely been quantified. This work evaluates annealing at 100 °C for 1 h on rotomolded PLA biocomposites reinforced with 10, 20, and 30 wt.% of agave, coir, or pine fibers. Crystallinity (DSC, XRD), density and porosity, morphology (SEM), water absorption, mechanical properties (tensile, flexural, Charpy impact, Shore D hardness), and 28-day disintegration under lab-scale composting conditions were measured for treated and untreated samples. Annealing raised the matrix crystallinity from below 21% to 41–56% and produced predominantly α crystals with a nearly constant average size of about 20 nm. The treatment improved the matrix-dominated properties for every formulation: for neat PLA, Charpy impact strength increased by 120% (28.1 to 61.7 J/m), flexural strength by 53% (61.1 to 93.4 MPa), and flexural modulus from 3264 to 4511 MPa. Tensile strength and modulus, in contrast, remained unchanged or decreased. Porosity, set by fiber content, was unaffected by annealing; at 30 wt.%, the matrix barrier nonetheless reversed, and annealed samples absorbed more water and disintegrated faster than untreated ones. Fiber content sets the balance between matrix crystallinity and the interfacial damage caused by crystallization-induced contraction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centro Universitario de Ciencias Exactas e Ingenierías (CUCEI), Universidad de Guadalajara, Blvd. Gral. Marcelino García Barragán #1421, Guadalajara C.P. 44430, Mexico.
- Departamento de Estado Sólido, Instituto de Física, Universidad Nacional Autónoma de México (UNAM), Ciudad de México C.P. 01000, Mexico.
ORCID-Profile: Erick Omar Cisneros-López, Josué Rivera-Aguilera, Pedro Ortega-Gudiño, Rubén González-Núñez, Roberto Carlos Vázquez-Fletes
Förderung
- Universidad de Guadalajara
Zitieren
APA
Cisneros-López, E. O., Rivera-Aguilera, J., López-Gonzaleznúñez, R. G., Ortega-Gudiño, P., González-Núñez, R., González-Quezada, E., & Vázquez-Fletes, R. C. (2026). Dual Effects of Thermal Annealing on Rotomolded PLA Biocomposites: A Fiber-Content Study. Polymers, 18(15), 1802. https://doi.org/10.3390/polym18151802
Vancouver
Cisneros-López EO, Rivera-Aguilera J, López-Gonzaleznúñez RG, Ortega-Gudiño P, González-Núñez R, González-Quezada E, et al. Dual Effects of Thermal Annealing on Rotomolded PLA Biocomposites: A Fiber-Content Study. Polymers. 2026;18(15):1802. doi:10.3390/polym18151802
BibTeX
@article{CisnerosLpez2026,
author = {Cisneros-López, Erick Omar and Rivera-Aguilera, Josué and López-Gonzaleznúñez, Rosa Gabriela and Ortega-Gudiño, Pedro and González-Núñez, Rubén and González-Quezada, Esperanza and Vázquez-Fletes, Roberto Carlos},
title = {Dual Effects of Thermal Annealing on Rotomolded PLA Biocomposites: A Fiber-Content Study},
journal = {Polymers},
year = {2026},
volume = {18},
number = {15},
pages = {1802},
doi = {10.3390/polym18151802}
}
EUVIMED